English / USA
Starting
!
Warning!
!Warning!
!
Warning!
To reduce the risk of injury from loss of
control, be absolutely sure that the
cutting tool is clear of you and all other
obstructions and objects, including the
ground, because when the engine starts
at starting-throttle, engine speed will be
fast enough for the clutch to engage and
turn the cutting tool.
Use of this product can generate dust
and fumes containing chemicals known
to cause respiratory disease, cancer,
birth defects, or other reproductive
harm. If you are unfamiliar with the risks
associated with the particular dust or
fume at issue, consult your employer,
governmental agencies such as OSHA
and NIOSH and other sources on
hazardous materials. The State of
California and some other authorities,
for instance, have published lists of
substances known to cause cancer,
reproductive toxicity, etc.
Your power tool is a one-person
machine. Once started, it may fling
foreign objects for a great distance.
15m (50ft)
With the engine running only at idle,
attach the power tool to the spring hook
of your harness (see appropriate
chapter of this manual).
To reduce the risk of eye and other injury
insure that bystanders are at least
50
feet (15 m) away. Bystanders should
Working Conditions
Control dust and fumes at the source
where possible. In this regard use good
work practices and follow the
be encouraged to wear eye protection.
Stop the engine and cutting tool
immediately if you are approached. Start
and operate your edger without
assistance. For specific starting
instructions, see the appropriate section
of the owner’s manual of the
KombiEngine. Place the power tool on
firm ground or other solid surface in an
open area. Maintain a good balance and
secure footing.
Operate and start your power tool only
outdoors in a ventilated area.
recommendations of OSHA/NIOSH and
occupational and trade associations.
When the inhalation of toxic dust and
fumes cannot be eliminated, the
operator and any bystanders should
always wear a respirator approved by
NIOSH/MSHA for the type of dust and /
or fumes encountered.
Operate the edger under good visibility
and daylight conditions only. Work
carefully.
!Warning!
Your edger produces toxic
exhaust fumes as soon as
the engine is running.
These gases (e.g. carbon
monoxide) may be
colorless and odorless. To
reduce the risk of serious or fatal injury
from inhaling toxic fumes, never run the
edger indoors or in poorly ventilated
locations.
FCB-KM
7
| Categories | STIHL Straight Edger Manuals, Straight Edger Manuals |
|---|---|
| Tags | STIHL FCB KM |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Edger |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)