English / USA
Approved KombiEngines
Mounting the Pole Pruner
Only use KombiEngines supplied by
STIHL or expressly approved by STIHL
for use with the KombiTool.
Mounting the Gearbox
The gearbox is correctly positioned if it
reaches or covers the mark (see arrow).
Pull the protective caps off the ends of
the drive tube and keep them in a safe
place.
This KombiTool may be operated only in
combination with the following
KombiEngines:
3
1
3
STIHL KM 55 R, KM 55 RC, KM 90 R,
KM 85 R, KM 110 R, KM 130 R
A
The KombiTool may also be mounted to
STIHL brushcutters with a split boom or
drive tube (T models).
Operation of this KombiTool is therefore
also permitted on the following power
tool models:
:
:
Insert clamp screws (3) as far as
stop.
With the engine is resting on the
machine support, line up the
gearbox (1) so that the clamp
screws face up and the chain
sprocket cover is exactly vertical.
STIHL FS 55 RT, FS 55 RTC, FS 85 RT,
FS 83 RT
:
Apply a mark to the drive tube at a
distance A of 50 mm (2“).
:
Tighten down the clamp screws (3)
in the following sequence:
–
–
–
–
tighten the left screw moderately
tighten the right screw moderately
tighten down the left screw firmly
tighten down the right screw firmly
2
1
:
Push the gearbox (1) onto the drive
tube (2) as far as stop – turn the
gearbox back and forth until the
square end of the shaft engages.
16
HT-KM
| Categories | Hedge Trimmer Manuals, STIHL Hedge Trimmer Manuals, Trimmer Manuals |
|---|---|
| Tags | STIHL HT, STIHL KM |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Trimmer |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)