English / USA
Mounting the Gearbox
Aligning the Gearbox
:
Remove both sweeping
attachments – see “Replacing the
Sweeping Attachments”.
:
Push the sleeve (4) onto the drive
tube (3) as far as stop.
:
:
Loosen the clamp screws (1).
Push the deflector (2) onto the drive
:
:
Line up the gearbox on the drive
shaft so that the distance between
the horizontal axles (7) and
tube (3) and beyond the mark
(
arrow).
:
:
:
Pull the deflector back until the front
end of its clamp is flush with, or
covers, the mark (arrow in lower
enlarged view).
deflector is the same at both sides.
Tighten down the clamp screws
firmly.
:
:
Loosen the clamp screws (5).
Position the deflector so that it is
It must not be possible to rotate the
gearbox on the drive tube.
vertical and the lug on the drive tube
Push the gearbox (6) onto the drive
tube (3) and engage it by turning it
back and forth.
(
arrow in upper enlarged view)
points up.
:
Mount the two sweeping
attachments – see chapter on
“Replacing the Sweeping
Attachments”.
Tighten down the clamp screws (1)
firmly.
It must not be possible to rotate the
deflector on the drive tube.
KB-KM, KW-KM
13
| Categories | Stihl Tiller Cultivator Manuals, Tiller Cultivator Manuals |
|---|---|
| Tags | STIHL KB, STIHL KM, STIHL KW |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Tiller Cultivator |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)