english / USA
:
:
Carry out the standard setting.
At high altitudes
Sweeper drum rotates when engine is
idling
Run the PowerSweep for about 3 to
:
Turn the high speed screw (H)
5
minutes to warm up the engine.
clockwise (leaner) no further than
stop until there is no noticeable
increase in engine speed.
:
Turn idle speed screw (LA) slowly
counterclockwise until sweeper
drum stops rotating and then turn
Rule of thumb
1
the screw about another / to 1 turn
At sea level
2
Turn the high speed screw (H) about 1 to
in the same direction.
:
Turn the high speed screw (H)
counterclockwise (richer) no further
than stop until there is no noticeable
increase in engine speed.
2
notches for every 1000 meter change
in altitude,
Erratic idling behavior, engine stops
even though setting of LA screw is
correct, poor acceleration
:
Open the throttle wide.
It is possible that maximum engine
speed may be reached with the
standard setting in each case.
Idle setting too lean:
Turn low speed screw (L)
1
:
counterclockwise (about /4 turn)
until the engine runs and
accelerates smoothly.
Adjusting Idle Speed
It is usually necessary to change the
setting of the idle speed screw (LA)
after every correction to the low speed
screw (L).
Erratic idling behavior
Idle setting too rich:
:
Turn low speed screw (L) clockwise
1
Warm up engine.
Engine stops while idling
(about / turn) until the engine runs
:
4
and accelerates smoothly.
:
Turn idle speed screw (LA) slowly
clockwise until the engine runs
smoothly – sweeper drum must not
rotate.
KW 85
23
| Categories | Multi-Task Kombi Equipment Manuals, Stihl Kombi Equipment Manuals |
|---|---|
| Tags | STIHL KW 85 |
| Download File |
|
| Language | English |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Blower Vacuum |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)