English / USA
Operating Instructions
During break-in period
During operation
A factory new machine should not be run
at high revs (full throttle off load) for the
first three tank fillings. This avoids
unnecessary high loads during the
break-in period. As all moving parts
have to bed in during the break-in
period, the frictional resistances in the
engine are greater during this period.
The engine develops its maximum
power after about 5 to 15 tank fillings.
Check chain tension frequently
A new chain has to be retensioned more
often than one that has been in use for
some time.
Chain cold:
Tension is correct when chain fits snugly
against the underside of the bar and can
still be pulled along the bar by hand.
Retension if necessary – see
“Tensioning the Saw Chain”.
:
:
:
Pull off the spark plug boot.
Unscrew and dry off the spark plug.
Do not make the mixture leaner to
achieve an apparent increase in
power – this could damage the
engine – see “Adjusting
Chain at operating temperature:
The chain stretches and begins to sag.
The drive links must not come out of the
bar groove – the chain may otherwise
jump off the bar.
Set the Master Control lever to stop
position 0.
:
:
Crank the engine several times with
the starter to clear the combustion
chamber.
Carburetor”.
Always disengage the chain brake
before opening the throttle. Running
the engine at higher revs with the
chain brake engaged (saw chain at
a standstill) will quickly damage the
engine and chain drive (clutch,
chain brake).
Retension the chain – see “Tensioning
the Saw Chain”!
Refit the spark plug. Connect the
spark plug boot and reassemble all
other parts.
Always slacken off the chain after
finishing work. The chain contracts
as it cools down. If it is not
slackened off, it can damage the
crankshaft and bearings.
:
:
Set Master Control lever to n
–
even if engine is cold.
Now start the engine.
If fuel tank has been run until dry and
then refueled:
:
Pull starter rope several times until
fuel system is primed.
40
MS 170, MS 180, MS 180 C
| Categories | Chainsaw Manuals, STIHL Chainsaw Manuals |
|---|---|
| Tags | STIHL 180, STIHL MS 170 |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Chainsaw |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)
I’m looking for a manual for the MS 180 chainsaw. I downloaded it, and the manual only contained the front cover of this manual.
Could you help
Thanks
There are 130 pages in this manual.