STIHL MS 440 Chainsaw Owners Manual

English / USA
Oil Quantity
Control
Taking Care of Guide Bar
After long period of full-throttle
operation
Allow engine to run for a short while at
idle speed so that engine heat can be
dissipated by flow of cooling air. This
protects engine-mounted components
(ignition, carburetor) from thermal
overload.
2
1
After finishing work
Different quantities of oil are required for
different bar lengths, types of wood and
cutting techniques.
3
3
:
Slacken off the chain if you have
retensioned it at operating
temperature during cutting work.
Use the adjusting screw (1) (on
:
underside of machine) to vary the
oil feed rate as required.
The chain contracts as it cools
down. If it is not slackened off, it
could damage the crankshaft and
bearings.
Storing your saw for a short period:
Wait for engine to cool down. To avoid
condensation, fill the fuel tank and keep
the machine in a dry place, well away
from sources of ignition, until you need it
again.
For average oil feed rate, turn
1
:
adjusting screw to “E“ (Ematic
position).
:
:
To increase oil feed – turn adjusting
:
Turn the bar over –
every time you sharpen the chain
and every time you replace the
chain –  this helps avoid one-sided
wear, especially at the nose and
underside of the bar.
screw clockwise.
To reduce oil feed  –  turn adjusting
screw counter-clockwise.
Your chain must always be wetted
Storing for a long period:
with a film of lubricant.
:
:
Regularly clean
See “Storing the Machine”!
the oil inlet hole (1),
the oilway (2) and
the bar groove (3).
Measure groove depth –
with scale on filing gauge* – in area
used most for cutting.
*
see “Guide to Using this Manual“
*
see “Guide to Using this Manual”
MS 440, MS 440 W, MS 440 C
39
Product Specification
CategoriesChainsaw Manuals, STIHL Chainsaw Manuals
Tags
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 127 pages
LanguageEnglish, Español
Product BrandSTIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Chainsaw
Document File TypePDF
Publisherstihl.com
Wikipedia's PageStihl
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website