English
Fuel System
3/8" chains
Specifications
Reduced kickback STIHL saw chains
(with green label)
All position diaphragm carburetor with
integral fuel pump
EPA / CEPA
Rapid Super C3 (33 RSC3)
Rapid Super C3 (36 RSC3)
Fuel tank capacity: 24.5 fl.oz
(0.725
L)
Pitch:
3/8" (9.32 mm)
The Emission Compliance Period
referred to on the Emissions
Compliance Label indicates the number
of operating hours for which the engine
has been shown to meet Federal
emission requirements.
Drive link gauge: 0.050 in.
Chain Lubrication
(1.3
(1.6
mm)/0.063 in.
mm)
Fully automatic, speed-controlled
reciprocating oil pump. Additional
manual oil flow control
Rollomatic E guide bars with
sprocket nose
Category
Reduced kickback STIHL guide bar
(with green label)
A = 300 hours
B = 125 hours
C = 50 hours
Oil tank capacity:
12.2 fl.oz
(0.36
L)
Bar lengths
(3/8"):
16, 18, 20, 25 in (40, 45,
50, 63 cm)
Weight
Groove width: 0.050 in.
Engine
(1.3
mm)/0.063 in.
dry, without bar and chain
(1.6 mm)
STIHL single cylinder two-stroke engine
MS 441:
14.6 lbs. (6.6 kg)
14.8 lbs (6.7 kg)
15.2 lbs (6.9 kg)
Other yellow-labeled chains and bars
for this powerhead:
MS 441 with handle
heating:
Displacement:
4.31 cu. in.
3
(70.7
cm )
MS 441 with wrap-
around handle:
STIHL saw chain (with yellow label)
Rapid Micro Comfort (33 RMC)
Rapid Micro Comfort (36 RMC)
Rapid Super Comfort (33 RSC)
Rapid Super Comfort (36 RSC)
Bore:
1.97 in. (50 mm)
1.41 in. (36 mm)
Stroke:
Engine power to
ISO 7293:
5.5 hp (4.1 kW)
at 9,500 rpm
Cutting Attachment
Idle speed:
2,800 rpm
Recommended cutting attachments
complying with Section 5.11 of ANSI B
175.1-2000.
Pitch:
3/8" (9.32 mm)
Max. permissible
engine speed with
bar and chain:
Drive link gauge: 0.050 in. (1.3
mm)/0.063 in.
13,500 rpm
Observe notes on ANSI B 175.1-2000
and definition of "reduced kickback
chain" in chapter on "Safety
Precautions".
(1.6
mm)
Ignition System
STIHL E Super guide bars (with yellow
label)
Electronic magneto ignition
(breakerless)
Bar lengths
(3/8"):
16, 18, 20, 25 in (40, 45,
50, 63 cm)
Groove width: 0.050 in.
Spark plug (resistor NGK BPMR 7 A
(1.3
(1.6
mm)/0.063 in.
mm)
type):
Bosch WSR 6 F
Electrode gap:
0.02 in. (0.5 mm)
5
2
MS 441
| Categories | Chainsaw Manuals, STIHL Chainsaw Manuals |
|---|---|
| Tags | STIHL MS 441 |
| Download File |
|
| Language | English, EspanĚol |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Chainsaw |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)