Toro 570Z PRX Series Sprinklers Irrigation Owners Manual

570Z
PRX Series Sprinklers
Featuring an in-riser pressure
regulator and X-Flow  shut-off device,
Specifying Information
570Z PRX models are ideal for
applications with high or varying
operating pressure, including long
lines and slope applications.
570ZPRX
XX
SI
COM
E
Model
Pop-Up Height
Optional
Optional
Optional
570ZPRX
6P6" (15mm)
4P4" (10mm)
SISide Inlet
COMCheck Valve
EEffluent Water
For Example:
When specifying 570Z PRX Series sprinkler with a pop-up height of 6" (15mm) with
a side inlet and non-potable water option, you would specify:
570Z–PRX–6P–SI–E
Specifications
Bidding Specifications
Radius: 0'–22' (0–6,7m)
Flow Rate: 6.5 GPH4.58 GPM
The sprinkler shall be of the
fixed-spray type designed for in-ground
installation. The sprinkler shall be
capable of accepting all 570 Series spray,
stream, flood, and microspray nozzles
and male-threaded risers and extenders.
The sprinkler shall operate within a
(24,617,3 LPM)
Recommended operating pressure
range: 2075 PSI (1,45,2 Bar)
Recommended operating pressure
range (COM models):
4" and 6" (100mm & 150mm) Models:  2075 psi (1,45,2 Bar) pressure range.
25
75 PSI (1,75,2 Bar)
The sprinkler shall have an in-riser
pressure regulator that maintains constant
30 psi (2,5 Bar) outlet pressure to
PCD nozzles: 3075 PSI (25,2 Bar)
Accepts all Toro spray, stream, flood
and microspray nozzles
570Z
PRX 6P SI
eliminate misting and fogging caused by
Zero flush seal and cap configuration    pressures above 30 psi (2,5 Bar).
Exposed surface: 2" cap diameter
Body diameter:
The sprinkler shall have a high-flow
shut-off device built into the riser that
restricts water loss if the nozzle is
removed or damaged, eliminating
potential erosion or safety issues. The
shut-off device shall allow for nozzle and
filter replacement or maintenance while
the system is running.
2",
3", 4", or 6" (50mm, 76mm,
100mm
(35mm)
12"
or 150mm) models: 1
5
(300mm) models: 1 " (41mm)
8
3
"
8
Inlet size:   12" (13mm) NPT female
thread
Pop-up height:
The body of the sprinkler shall be
injection molded from ABS, a non-
corrosive, impact-resistant, UV-resistant,
heavy-duty plastic material. The sprinkler
shall have a color-coded riser screen
filter, stainless steel or plastic,
Pop-Up
to Nozzle
1
4 "
4
(108mm)
Height
570Z-4P
570Z-6P
6
1
4
"
(156mm)
8
1
4
"
6 "
1
4
(210mm)
(156mm)
1
6 "
4
156mm)
appropriately sized to prevent entry of
foreign material to the nozzle. All parts
shall be removable through the top of the
sprinkler case.
The sprinkler shall have a single-piece
riser/body seal, that flushes only upon
retraction to clear any debris from around
the riser, and a stainless-steel spring to
ensure positive retraction. The seal shall
have no flush during pop-up to allow the
maximum number of sprinklers per
station. The seal shall be a single piece
570Z PRX 4P
570Z-6P SI *
8
1
"
4
(210mm)
*
Side Inlet = 4 " (120mm) from top of
3
4
sprinkler to center of side inlet.
Sprinkler weight:
570Z-4P
570Z-6P
3.2 oz.
4.1 oz.
4.2 oz.
570Z-6P
SI
injection molded from Alcryn, a synthetic
§
rubber.
(continued)
SEPTEMBER 2000
Product Specification
CategoriesSprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 2 pages
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website