835S
Series Sprinklers
Specifying Information—835S Series Sprinklers
835S
X
X
XX
X
X
Body
Inlet
Body
Threads
Valve
Type
Pressure
Regulation*
Arc
Nozzle
Optional
3—1"
5—Full and
Part circle
0—NPT
4—ACME
5—BSP
1—NO Hydraulic
2—Check-O-Matic
6—Electric
30 31 32 6—65 psi (4,5 Bar)
33 34 35 8—80 psi (5,5 Bar)
E–Effluent
DL–Decoder
36 37
1—100 psi (6,9 Bar) N–Ni Plated Sol.
Example:
When specifying a 835S Series Sprinkler with ACME threads, #34 nozzle,
an electric valve and pressure regulation at 65 psi (4,5 Bar), you would specify:
835S–46–346
*Electric models only. Not all models are available. All electric models are equipped with a
selectable pilot valve that provides settings at 50, 65, 80 and 100 psi (3,4, 4,5, 5,5 or 6,9 Bar).
Specifications
Bidding Specifications
•
•
•
Radius: 42'–92' (12,8–28m)
The sprinkler shall be capable of full-
and part-circle operation and be a gear-
driven rotary type. The sprinkler shall
be of a pop-up design with an overall
height of 10” (254mm), a body flange
The cap shall also identify the main
nozzle size installed and the date of
manufacture.
Flow rate: 7.1–45.3 GPM (26,9–171,5 LPM)
Arc: Bidirectional, part-circle rotation,
adjustable from 40°–330°, and true
unidirectional 360° full-circle rotation.
Pilot valve selectable at: 50, 65, 80 or
The sprinkler shall include a
ratcheting riser feature that allows the
user to adjust the position of the riser
in the body without disassembly.
•
•
diameter of 6 ⁄ " (165,1mm), a cap
1
2
3
diameter of 3 ⁄ " (85,7mm) and a pop-up
8
1
00 psi (3,5, 4,5, 5,5 or 6,9 Bar)
Recommended operating pressure range:
5–100 psi (4,5–6,9 Bar)
height of 4
3
⁄
16
" (106,4mm). The sprinkler
The arc of the sprinklers shall be
adjustable by the use of an adjustment
band located between the nozzle base
and riser. The left terminus of the arc
shall be fixed, with the right position
adjustable from 40°minimum, up to
360° maximum. When 360° arc
adjustment position is reached, the
sprinkler will rotate uni-directionally
in the clockwise direction. The
6
shall have a 1" (25mm) NPT, BSP or
ACME female-threaded inlet. The
sprinkler shall be capable of covering
___ feet radius at ___ pounds per square
inch pressure with a discharge rate of
___ gallons per minute.
Water distribution shall be via three
4
nozzles mounted in a 2 ⁄ " (57mm)
1
diameter plastic nozzle turret. The three
nozzles shall be oriented in the same
1
direction and elevate 3 ⁄ " (83mm) above
4
•
•
•
Maximum pressure: 150 psi (10,3 Bar)
Minimum pressure: 40 psi (2,8 Bar)
Activation options:
•
•
•
Electric valve-in-head
Normally open valve-in-head
Check-O-Matic: checks 37' (11,3m)
of elevation change
•
Electric valve-in-head solenoid: 24 VAC,
0/60 Hz
5
sprinkler arc shall be adjustable by hand
(wet or dry); requiring no tools. The arc
adjustment band shall identify the 90°,
•
Inrush: 0.12 A
•
Holding: 0.10 A
the body when in operation. All of the
sprinkler nozzles shall be of a thread-in
type and color-coded for easy
180°, 270°
and 360° arc positions.
•
•
•
•
•
• Pop-up height overall: 4 3⁄16" (106,4mm)
•
•
Stator variations: 2
Inlet size: 1" (25mm) NPT, BSP or ACME
Body height: 10" (254mm)
The sprinkler shall include a nozzle
base clutch feature that enables the
user to rotate the nozzle base in either
direction (wet or dry) and hold it in
one position (during operation) for
spot watering.
The electric models of the sprinkler
shall be available with a selectable
pressure-regulator capable of 50, 65, 80
and 100 psi (3,5, 4,5, 5,5 and 6,9 Bar)
settings. The pilot valve case shall
provide graphics to identify selection
points and a locking feature to ensure
the integrity of the selection. The date
of manufacture shall also be indicated
on the pilot valve case.
The internal valve assembly shall be a
piston-type that vents to atmosphere,
providing valve friction loss of less
than 5.0 psi (0,34 Bar). The sprinkler
shall be designed to provide smooth
valve closure in excess of two seconds
to minimize damage resulting from
surges and water hammer. All valve
seals shall be constructed of natural
identification of radius and gallonage
performance capabilities. All nozzles
shall be sized to allow any particle
capable of passing through the riser
screen to pass through the nozzle. The
sprinkler shall be capable of accepting
a fourth nozzle that can be installed 180°
from the main nozzle to provide
coverage behind the sprinkler. The back
nozzle position shall be manufactured
with a factory-installed plug that can be
removed to accept up to 200 different
inner and intermediate nozzle
combinations. The sprinkler shall be
capable of accepting 7 different color-
coded main nozzles, a main nozzle plug
for short radius applications, and 39
different color-coded inner/intermediate
nozzles .
The main nozzle shall incorporate a
trajectory adjustment that provides main
nozzle discharge angle from 7° to 30° in
Body flange diameter: 6
1
⁄
2
" (165,1mm)
" (83mm)
Pop-up height to nozzle: 3 ⁄
1
4
Weight: 2.98 lbs. (1,4 kg)
Nozzle Variations: 8 (30, 31, 32, 33, 34,
35, 36 and 37)
•
•
Three in-line nozzles with rotating
stream pattern
Precipitation rates:
•
•
Minimum: .37"/hr. (9,4mm/hr)
Maximum: .66"/hr. (16,8mm/hr)
•
•
Trajectory: adjustable from 7°–30° in 1°
increments (24 positions)
Apex (at distance from sprinkler):
(65 psi [4,5 Bar] @ 25° trajectory)
31 - 11' (3,4m) at 33' (10,1m)
32 - 12' (3,7m) at 34' (10,4m)
33 - 13' (4,0m) at 35' (10,7m)
34 - 14' (4,3m) at 39' (11,9m)
35 - 15' (4,6m) at 43' (13,1m)
(80
3
3
psi [5,5 Bar] @ 25° trajectory)
6 - 17' (5,2m) at 45' (13,7m)
7 - 18' (5,5m) at 45' (13,7m)
1°
increments. The sprinkler cap shall
graphically depict trajectory adjustment
points at 7°, 10°, 15°, 20°, 25° and 30°.
rubber.
(continued)
October 2007
| Categories | Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro 835S Series |
| Download File |
|
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939 |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)