Quick Reference Guide
Reelmaster“ 5100/5300/6500/6700
Note: Machines built before 1997 model year (S/N before 70001) must have updated software installed.
Cutting Unit Selection
The Reelmaster 5000 and 6000 series Controllers must be programmed with the Blade configuration
‘
(number of Blades) on the installed cutting units in order for the ClipAce feature to operate properly. If
the Blade configuration is not set, the cutting units will not operate in the mow position.
Do not sit in the seat; A closed Seat Switch will void this procedure!
1.
2.
Key switch in OFF position.
Connect the Diagnostic ACE Display tool to the Controller (Primary on RM 6700-D) Loop-back
Connector. Remove the overlay from the tool.
3.
4.
5.
Move Enable / Disable Switch to ENABLE position (Master on RM 6700-D).
Move Lower / Mow - Raise Lever to LOWER position and hold.
Turn Key switch ON, and continue to hold Lower / Mow - Raise Lever in LOWER position until Reel
Control Lamp starts to flash (2 seconds).
6.
7.
8.
Release the Lower / Mow - Raise Lever to center position. Reel Control Lamp will now be on steady.
Select Outputs Displayed on Diagnostic ACE Display tool.
Move Lower / Mow - Raise Lever to the Lower position once for each blade on the installed Cutting
Units (e.g. 5 times for 5 blades, 8 times for 8 blades, etc..). Wait for Reel Control Lamp to come
back on before each Lower / Mow - Raise Lever movement. Diagnostic ACE Display tool will
display number of times Lower / Mow - Raise Lever has been moved.
9.
Move Enable / Disable Switch to DISABLE position (Master on RM 6700-D). Reel Control Lamp will
now flash the number of blades Controller has been programmed for, then turn off. The Diagnostic
ACE Display tool will also display the Blade configuration programmed.
10.
Turn Key switch OFF and disconnect Diagnostic ACE Display tool. Connect Loop-back Connector. The
blade configuration now set.
Note: Do not do step 8 when verifying Blade configuration in the field.
ACETM
15
Operation, Diagnostics and Programming
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro 98962SL |
| Download File |
|
| Document Type | Catalog |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)