Toro Commercial Products Troubleshooting Guide Groundsmaster 345 325 D 96904SLDEX 1 Product Overview

TORO GM 345/325-D
Cutting Units    75
Cutting Units
Maintenance and Service
Spindle service
If noisy operation of the cutting unit is encountered and the blade spindles need to be repaired, refer to the
complete repair procedures in the service manual.
The replacement bearing set consists of:
1.
2.
3.
4.
5.
The upper and lower bearings races.
A snap ring spacer that positions the bearing races in the spindle housing.
An outside spacer to set the distance between the bearing races.
Two bearings.
An inside bearing spacer and an inside spacer ring.
The inside spacer and the spacer ring position the bearings and set the running clearance.
(NOTE: there in no groove in the shaft that the small ring sets in).
If the spindle does not rotate after assembly, verify that all the spacers and rings are properly installed.
The bearings, races, spacers and snap rings are a matched set and should not be intermixed.
IMPORTANT: If a new spindle housing is being used, new bearings and the matched snap ring set must
be installed. Never use the old bearings, spacer, and snap ring with a new spindle housing. By contrast,
use only new bearings with cups and spacer when installing bearings into a used spindle housing that
still has a snap ring installed.
Seal replacement
When replacing the spindle seals be careful to install the seals with the seal lips facing in the correct direction.
72” Recycler Deck
1. The upper seal lip faces inward toward the upper bearing.
2. The lower seal lip faces outward, away from the lower bearing.
72” Rear Discharge & Side Discharge
1. The upper seal lip faces outward away from the upper bearing.
2. The lower seal lip faces outward, away from the lower bearing.
Notes
_______________________________________________________________________________________________________________
_______________________________________________________________________________________________________________
_______________________________________________________________________________________________________________
_______________________________________________________________________________________________________________
_______________________________________________________________________________________________________________
_______________________________________________________________________________________________________________
_______________________________________________________________________________________________________________
_______________________________________________________________________________________________________________
_______________________________________________________________________________________________________________
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags, ,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 84 pages
Document TypeCatalog
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

One thought on “Toro Commercial Products Troubleshooting Guide Groundsmaster 345 325 D 96904SLDEX 1 Product Overview

  1. “Toro Commercial Products Troubleshooting Guide Groundsmaster 345
    325 D 96904SLDEX 1 Product Overview” ended up being
    a fantastic post and also I actually was really joyful to discover it.
    Thanks for your time,Gabriela

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website