Press NEXT to set next function OR Press DIAL to move to AUTO-RUN
Contro ller Specifica tions:
PROGRAM ERASE – You can erase all program information for a selected
program. This can be done for any selected program.
Press NEXT to select the program to erase.
The DDCWP will run one m aster valve and one station valve
simultaneously. The DDCWP is a DC controller. This m eans it ONLY
runs DC latching solenoids. It will not run AC solenoids. It has been
fully tested using Toro DC Latching Solenoids. If you intend to use other
brands, test them before m aking an installation.
Press +/ON to erase.
will flash 5 times.
Dial position: AUTO-RUN
As DC latching solenoids are m ore susceptible to debris than AC solenoids,
Toro recom mends that a filter and m aster valve be installed in the system .
The DDCWP is tested to be operational under 2 m eters of water and is
marked IP68. It is im portant to com pletely dry the controller before
opening the battery com partm ent. It is also im portant to m ake waterproof
connections for the longevity of the system com ponents. The DDCWP is
supplied with 3M waterproof connectors for this purpose. If m ore
connectors are required, Toro recom mends 3M DBY type connectors as
these are readily available in m ost m arkets.
The AUTO-RUN position is used to provide inform ation regarding the
controller's operation as well as for reviewing all data stored in the
irrigation program s.
The following is a list of inform ation you can observe on the display:
•
•
•
Current Tim e & Day
Connect all field wiring before applying battery power to the controller.
This will insure that all connected DC solenoids are properly calibrated
for operation.
A program (s) in OFF position
Information regarding the operating station: program , station and start
times
•
•
•
Active Rain Delay
Installation Instru ctions: DDCWP Contro ller
Level and m ount controller m ounting bracket to a solid surface. If
mounting in a valve box, it is suggested to m ount the bracket under
the lid and leave sufficient wire so the lid can be rem oved to access
the controller.
If irrigation is suspended due to SENSOR input
Low battery state
To turn OFF the working cycle, press DIAL to MANUAL PROGRAMS and
press -/ OFF.
If you wish to review what data you have in each program :
Program Review: Press NEXT to PROGRAM REVIEW. Press PROG to select
the program . Press +/ ON to start the review.
Next connect the solenoid wires to the controller. The controller drives
Toro latching solenoids. It is essential for proper operation that the wire
colors between the solenoid and the controller be m atched. The red
controller station wire is connected to the red solenoid wire and the black
controller com mon wire is attached to the black solenoid wire. It is also
essential that a waterproof wire connection be m ade. The DDCWP is
shipped with waterproof connectors for this purpose. These can be used
for wire sizes 19 to 26 AWG. (0.9 m etric is the largest size wire these
accept)
Stat us: If you wish to have a com plete status report on the operating
station:
Press NEXT to STATUS.
Remaining station RUN TIME will be displayed as well as the operating
program .
Press NEXT to return to AUTO-RUN position.
Note:
During progra mming, the dia l will return to the AUTO-RUN
position a utoma tically after 3 minutes of ina ctivity.
(continued on next page)
-
10 -
- 3 -
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro DDCWP |
| Download File |
|
| Document Type | Owner's Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)