Groundsmaster 3500-D Specifications
®
GROUNDSMASTER 3500-D
Kubota
®
35 hp (26.1 kW) turbo-charged, liquid-cooled, 3-cylinder, diesel engine. Available power: 32 hp (23.9 kW) at 2800 rpm.
ENGINE
67.1 cu. in. (1.1 liter) displacement governed to a maximum speed of 3050 rpm. Oil capacity 4 quart (3.8 liter) with standard oil filter.
Rear-mounted, cross flow 4-row radiator.
FUEL CAPACITY
CONFIGURATION
11 gallon (42 liter).
Rear mounted engine, front operator position. Two post ROPS, seat belt and slope indicator standard. Sidewinder cutting unit system.
™
3-wheel drive in mow and transport. Series/Parallel hydrostatic, closed-loop transmission provides infinitely variable ground speed in
™
forward and reverse. Variable displacement piston type pump.
TRACTION DRIVE
GROUND SPEED/
CLEARANCE
Mow: 0-6 mph (0-10 km/h), mow speed is factory preset at 6 mph but is adjustable; Transport: 0-9 mph (0-14km/h);
Reverse: 0-4 mph (0-6 km/h). Ground Clearance: 6" (15.3 cm).
Forward and reverse traction control pedals; mow/transport foot lever; hand activated parking break; hand operated ignition key switch;
tilt steering wheel lock; PTO switch; throttle; joystick control for deck raise and lower as well as moving decks side-to-side; cutting deck
transport lock.
CONTROLS
GAUGES &
DIAGNOSTICS
Fuel gauge, engine coolant temperature gauge, and hour meter. Light cluster with glow plug and charge indicator lights, amp, low
engine oil pressure and high coolant temperature warning lights (high temperature safety shut off).
ELECTRICAL &
Traction pedal, operator presence in seat, PTO engage or disengage, and cutting deck mow or transport safety interlock switches.
INTERLOCKS Parking break set prohibits movement through traction pedal. 40 amp alternator and 12 volt, 585 CCA battery.
HYDRAULICS
STEERING
TIRES/WHEELS
BRAKES
Open center, manual valves, gear pump hydraulic system. System capacity approximately 3.5 gallon (13.2 liter) reservoir.
Hydraulic power steering, tilt wheel.
20 x 12-10, 4-ply rating, Turf Trac front tires. 20 x 10-10, 4-ply rating, Turf Trac rear tires.
Dynamic through hydrostatic transmission service brake. Hand actuated over center, drum type parking brake.
Installed as standard equipment.
SEAT
Height
70.8" (180 cm) w/ROPS
Length
116" (295 cm)
Width
71.8" (182 cm) with 68" (173 cm) WOC
75.8" (193 cm) with 72" (183 cm) WOC
Wheelbase
59.5" (151 cm)
OVERALL
DIMENSIONS
WEIGHT
2,200 lbs. (1,100 kg) with cutting units.
WARRANTY
Two year limited warranty. Refer to operator’s manual for further details.
CERTIFICATION
Complies with ANSI B71.4-2004 and European Community (CE) with required rear ballast.
CUTTINGDECKS
TYPE 3 Contour™ Plus 27" (69 cm) rear-discharge rotary with rear roller on each deck. Sidewinder system allows decks to slide right and
left 12" (30 cm) of center, 24" (61 cm) total travel. Mulching kit optional.
68" (173 cm), standard and 72" (183 cm) optional. Deck overhang for trimming is 12" (30.5 cm) at 68" (173 cm) width of cut and
14" (35 cm) at 72" (183 cm). Overlap: 6.5" (16.5 cm) at standard width of cut.
WIDTH OF CUT
HEIGHT OF CUT
MOWING RATE
.75-4" (1.9-10.2 cm) in .25" (.6 cm) increments.
Mows up to 4.1 acres/h (1.7 hectares/h) at 6 mph (10 km/h) (assumes no overlap or stops).
10-gauge steel constructed chambers with 12-gauge welded reinforcements. 1.5" (3.8 cm) square x .25" (.6 cm) wall tube with
CONSTRUCTION 7-gauge side supports. Spindle support 3/16" (.48 cm) high-strength steel and 10-gauge exterior channels.
SPINDLE
ASSEMBLY
Ductile cast iron spindle housing. Dual greaseable tapered roller bearings. 1.25" (3.2 cm) diameter solid cold finished steel spindle
shaft. Splined connection between spindle shaft and pulley. Welded blade retainer plus anti-scalp cups.
ANTI-SCALP FEATURES
MULCHING KIT
6" (15 cm) anti-scalp cups on each blade.
Leaf mulching kit available.
SUNSHADE
BIMINI SUNSHADE
Model 30358
* Specifications and design subject to change without notice.
The Groundsmaster 3500-D is manufactured
in Tomah, WI ISO 9002 Certified Plant.
| Categories | Lawn Mower Manual, Toro Lawn Mower Manual |
|---|---|
| Tags | Toro Groundsmaster 3500 |
| Download File |
|
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)