DISASSEMBLY & REASSEMBLY
Replacing Blade Spindle or Spindle
Bearings
Cable Adjustment
Lower the bail to the rest position. The switch should
be off. Proper adjustment is achieved when the slack
is removed from the cable, but no tension is applied.
Remove the nut on the large pulley and remove the
pulley.
Belt Replacement — 120 Volt Models
1.
2.
3.
Remove the motor cover retained with four
screws.
1.
Remove four screws and lift cover off (Figure 56).
Roll the belt off the large pulley. See Belt
Replacement on page 6 - 3.
Remove the nut on the large pulley and remove
the pulley.
NOTE: The blade and spindle shaft may drop
down when the pulley is removed.
Cable Replacement — All Models
1.
2.
Remove the motor cover (4 screws).
The cable has 2 fasteners — 1 bolt on the upper
handle and 1 screw in the left rear corner of the
mower body.
Figure 56
Scan-9
2.
Push on the spring loaded idler assembly to
remove tension from the belt. Rotate the spindle
pulley and walk the belt from the spindle pulley
(Figure 57).
3.
4.
Unhook the “Z” bend on both ends of the cable.
There is a bracket supporting and guiding the
cable near the switch end. This guide bracket is
slotted so the cable inner wire can be removed
without removing the bracket (Figure 55).
Note that this is a double bracket. The upper
retainer is used on battery models while the lower
is used on 120 volt models.
Figure 57
0663-009
3.
4.
5.
Remove the belt from the motor pulley.
Install the belt in reverse order.
Install cover.
Figure 55
0663-014
Carefree Mower Service Manual
6 - 3
| Categories | Lawn Mower Manual, Lawn-Boy Lawn Mower Manuals, Toro Lawn Mower Manual |
|---|---|
| Download File |
|
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)