Toro MINI8 Bidding Specs Catalog

Mini 8 Series
The Mini 8 Series is a half-inch inlet
gear-drive rotor that is ideal for residential
and light commercial applications. Mini 8
provides value and water efficiency when
landscape areas are too big for sprays,
but too small for full-size rotors.
Specifying Information
MINI8
4
XX
Description
Body
Nozzle
MINI8Mini 8 Rotor
4Lawn Pop-up
75.75
101.0
151.5
202.0
303.0
For Example:
When specifying a Mini 8 Series sprinkler with a 3.0 nozzle, you would specify:
MINI8-4-30
Specifications
Bidding Specifications
The part- and full-circle sprinkler shall
be a single-stream, water-lubricated,
gear-drive type capable of covering a
_____ radius at _____ psi with a discharge
rate of ______GPM. The sprinkler shall
have an adjustable arc coverage of 45 to
Radius: 19'–35' (5,7–15,2m)
Flow rate: 0.83.0 GPM (311,3 LPM)
Recommended operating pressure
range: 3050 psi (2,43,5 Bar)
Optimum operating pressure: 40 psi
(2,8)
360 degrees. Arc adjustment shall be
Inlet size:   12" (20mm) NPT female
Cap diameter: 214" (57mm)
Body diameter: 134" (44mm)
performed with or without the sprinkler
in operation and shall require only a
flat-blade screwdriver.
The sprinkler shall have a
pressure-activated wiper seal that
thread
Height: 6" (150mm)
Pop-up to nozzle: 334" (95mm)
positively seals against the pop-up stem to
keep debris out of the rotor and to clean
debris from the pop-up stem as it retracts.
The wiper seal shall prevent the
sprinkler from sticking up, and be capable
of sealing the sprinkler cap to sprinkler
body under normal operating pressures.
The sprinkler shall have a robust trip
mechanism for enhanced reliability.
The sprinkler shall have a screen
installed in the pop-up riser to filter inlet
water and to protect the drive from
clogging.  The sprinkler shall have a half-
inch NPT female-threaded bottom inlet.
The sprinkler shall have a strong
stainless steel retraction spring for positive
pop-down.  Pop-up height as measured
from the top of the cap, at normal
installation, to the middle of the nozzle
shall be 3 inches (95mm). The rotors
3
4
overall height shall be six inches.
The sprinkler shall have five
interchangeable nozzles to allow the
various required arcs to be balanced. The
stainless-steel adjustment screw is capable
of reducing the radius up to 25 percent.
The sprinkler shall be developed and
manufactured by an ISO 9001-certified
facility. The sprinkler shall be a model
number ______________________ and
shall be manufactured by The Toro
Company, Irrigation Division.
FEBRUARY 2003
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 1 page
Document TypeCatalog
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website