Operating and Service Instructions
Flow Gauge Model 995-01 and 53351
Introduction
The Toro flow gauge is a dual purpose device designed to measure water pressure to160 PSI and water
flow to 13 GPM. This flow gauge is not intended for use on lines larger than 1 inch (where a large volume of
water is available). The gauge will only measure flow through the hose bib – not in the line.
CAUTION
To prevent damage to flow gauge, do not exceed 13 GPM or allow the flow gauge to freeze.
Operation
Note: Required system pressure information should be obtained before conducting flow check.
1.
2.
3.
4.
5.
6.
7.
For best results; measure water flow at approximate time watering will be scheduled.
Ensure no water is being used at the location.
Attach gauge to hose bib nearest to point of sprinkler line connection.
Open control valve slightly to allow minimum flow.
Open hose bib slowly to avoid damage to gauges.
When hose bib is fully opened, close control valve and read system static pressure. Record this reading.
Open flow gauge slowly. As the control valve opens, pressure gauge will drop from the static reading and
flow gauge will rise. Continue to open control valve until pressure drops to the required system pressure.
Read and record PSI and GPM indicated on gauge.
Note: If rapid fluctuation occurs on flow gauge, record the average reading. Additional reading of pressure
and flow may be helpful for further design information.
| Categories | Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro 53351, Toro 995-01 |
| Download File |
|
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939 |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)