Toro P 220 Series Plastic Valves Sprinkler Irrigation Owners Manual

Installation Guidelines
Note the flow direction arrows on the bonnet  or body and install accordingly.
The valve can be installed at any angle without affecting  operation.
The valve body plug and o-ring must be properly  installed in the unused inlet.
Use direct-burial wire, utilizing  different color codes for each station control wire and one color for the common  wire to all
valves.
Waterproof wire splice connectors  are absolutely essential for proper electric control  system operation. Follow the
installation instructions  provided with the connectors for optimum waterproof  splice protection.
Leaving a wire expansion loop at each valve  location on long-run wire lengths is recommended.
Valve Operation and Adjustment
Flow Control
The flow control is used to reduce the flow and pressure  to valve outlet. By turning the control handle clockwise, the flow  will be
gradually reduced to zero.
For valve models without EZReg,  adjust the flow control as necessary for optimum sprinkler  performance.
For valve models with EZReg, the flow control  should remain in the fully open position. Use only for emergency  shut off or
for valve zone fine tuning.
Internal Manual Bleed Knob
The internal manual bleed system  is used to manually operate the
valve. Turning the internal bleed knob (located  beneath the solenoid)
counterclockwise allows  water to bleed downstream from the
diaphragm chamber. Internal pressure  is relieved from the top of the
diaphragm, allowing the valve  to open. Turning the bleed knob
clockwise until tight shuts off the discharge  enabling pressure to
build within the diaphragm chamber, causing  the valve to close.
Figure 1
External Manual
Bleed Knob
Flow Control
Knob
EZReg
External Manual Bleed Knob  (flush mode)
Internal Manual
Bleed Knob
The external manual bleed knob,  located on top of the flow control
handle, is used for system flushing. Turning this knob
counterclockwise allows  water in the diaphragm chamber to vent to
atmosphere, creating maximum  opening power and debris flushing
action. This operation bypasses  the regulator (if installed) and opens
the valve fully, regardless of regulator setting.  In addition, the
metering rod (attached to the external  bleed knob) can be easily
removed for cleaning as necessary.
Schrader
Valve
Spare Bonnet
Nut
EZReg Adjustment (pressure  regulating models only)
An accurate, adjustable dial, coupled  with a forward-flow valve design, allows the P-220  series valve with EZReg to regulate
downstream water pressure  with precision. It’s easy and simple to use and requires only 10 PSI differential  pressure to
operate. The EZReg will operate during  powered and manual valve operation using internal  manual bleed.
To adjust the downstream pressure,  remove the cover from the regulator dial, then turn the dial until the pointer is on the
desired pressure of 5-30 PSI (EZR-30)  or 5-100 PSI (EZR-100).
Note: Due to the micro-adjustment  feature of the EZReg, the dial requires 10 revolutions for complete  regulation range.
Operate the valve (electrically  or manually). Check the flow control to confirm that it is in the fully open position. Adjust the
regulator dial if necessary for optimum  sprinkler operation.
To confirm the downstream pressure  using a pressure gauge, remove the cap from the Schrader-type  valve located directly
below the EZReg. Attach a Toro pressure gauge (Model 995-51)  to the Schrader-type valve for a direct reading. Adjust the
EZReg dial as necessary for the desired  pressure.
Note: The valve will remain watertight  in the closed position if removal of the EZReg assembly is required.
©
2000 The Toro Company, Irrigation Division
Form Number 373-0102 Rev. A
Product Specification
CategoriesSprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 2 pages
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website