Toro Reelmaster 3100 D 03206 ENGINE CONFIGURATION FUEL CAPACITY TRACTION DRIVE Specifications

Reelmaster   3100-D Specifications*
®
REELMASTER 3100-D, MODEL 03206
REELMASTER 3100-D, MODEL 03207 W/SIDEWINDER
Kubota  liquid-cooled diesel, 3-cylinder, 21.5 hp (16 kW) net @ 2500 RPM. 68.5 cu. in. (1123 cm ) displacement. Pressurized
®                                                                                                                                                                                                                                                                3
ENGINE
lubrication system with 3.5 U.S. qt. (3.3 liter) capacity. Heavy duty, radial seal air cleaner. Fuel/water separator with visible bowl.
Rear mounted engine, front operator position. Rear mounted radiator. Two post ROPS and seat belt standard.
7.5 gallons (28 liters)
CONFIGURATION
FUEL CAPACITY
Series/Parallel hydraulic traction circuit provides continuous 3-wheel drive, in mow and transport. Hydrostatic traction drive
provides infinitely variable speed in forward and reverse. 6 gallon (23 liter) hydraulic system capacity.
TRACTION DRIVE
GROUND SPEED
Mow: 0-6 mph (0-10 km/h); Transport: 0-9 mph (0-14 km/h). Reverse: 0-4 mph. (0-6 km/h).
Forward and reverse traction control pedals, mow/transport lever, hand activated park brake, ignition key switch, tilt steering wheel
lock, PTO switch, throttle, joystick control for cutting unit raise and lower (and for moving cutting units side-to-side on Sidewinder
equipped models), cutting unit transport lock, reel speed and backlap control knob.
CONTROLS
GAUGES
Hour meter, fuel gauge, cluster gauge with glow plug and charge indicator lights, and low engine oil pressure and high coolant
temperature warning lights (high temperature safety shut off).
ELECTRICAL &
INTERLOCKS
12 volt, 585 cold cranking amps at 0° F (-18° C), 40 amps with regulator/rectifier. Traction pedal, operator presence in seat, PTO
engage or disengage, and cutting unit mow or transport safety interlock switches.
TIRES
FRAME
Front: 20 x 10-12, 4-ply Turf Trac. Rear: 20 x 12-10
Formed steel, welded steel and steel tubing.
Hydrostatic service brake, parking brake.
Power steering with tilt steering wheel.
BRAKES
STEERING
Track Width:
Wheel Base:
55" (140 cm)
56" (142 cm)
Overall Height:
Transport Width:
71" (180 cm) with ROPS
OVERALL
DIMENSIONS
80" (203 cm) in 72" (183 cm) woc
92" (234 cm) in 85" (216 cm) woc
1860 lbs. (844 kg)
Overall Length:
93" (248 cm)
Approx. Weight with Cutting units:
Fixed position cutting units.
Operator controlled moveable cutting units travel ±12" (30 cm)
left or right from center; total of 24" (61 cm) of infinite variability.
CUTTING UNIT
CONFIGURATION
CUTTING UNIT
OFFSET
3" (7.6 cm) in 72" (183 cm) width of cut
10" (25 cm) in 85" (216 cm) width of cut
Maximum 15" (38 cm) in 72" (183 cm) width of cut.
Maximum 22" (56 cm) in 85" (216 cm) width of cut.
This product complies with the American National Standards Institute (ANSI B71-4 – 1999) and European Community
specifications (CE Certified).
CERTIFICATION
WARRANTY
Two-year limited warranty, refer to operators manual for details.
CUTTING UNITS
TYPE
Three hydraulically driven, balanced, 7" (17.8 cm) diameter reels. Cutting units interchangeable to all three positions.
REEL BLADE OPTIONS
5, 8, and 11-blade reels available for 27" (68.6 cm) cutting unit. 5 and 8 blade reels available for 32" (81.3 cm) cutting unit.
Height of cut ranges 1/4" to 13/4" (6 - 45 mm) standard in floating position, 1/2" to 2 5/8" (13 - 67 mm) in fixed position. Maximum 3" (7.6
HOC RANGE
cm) height of cut (approximate) in floating position when configured with heavy duty Wiehle   roller and optional front roller brackets.
®
CUTTING WIDTH
72" (183 cm), or 85" (216 cm) width of cut dependent on cutting unit selection.
CLIP FREQUENCY/
BACKLAPPING
Manually controlled variable reel speed for adjustment of clip frequency. Standard on-board backlapping.
Single point adjustment (SPA) of bedknife to reel.
BEDKNIFE TO REEL
ADJUSTMENT
ROLLERS
Full roller standard on rear of cutting unit. Front roller options: full, Wiehle
®
, sectional, or anti-scalp (for fixed position cutting units).
SUNSHADE
BIMINI CANVAS
Model 30358
* Specifications and design subject to change without notice.
The Reelmaster 3100-D is manufactured
in Tomah, WI  ISO 9002 Certified Plant.
Product Specification
CategoriesLawn Mower Manual, Toro Lawn Mower Manual
Tags
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 1 page
Document TypeSpecifications
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website