Toro Reelmaster 3100 D Specifications 03170 ENGINE CONFIGURATION FUEL CAPACITY TRACTION DRIVE Specs

Reelmaster   3100-D  Specifications*
®
REELMASTER 3100-D, MODEL 03170
REELMASTER 3100-D, MODEL 03171 w/SIDEWINDER
Kubota  liquid-cooled diesel, 3-cylinder, 21 5 hp (16 kW) net @ 2500 RPM  68 5 cu  in  (1123 cm3) displacement  Pressurized
®
lubrication system with 3 5 U S  qt  (3 3 liter) capacity  Heavy duty, radial seal air cleaner  Fuel/water separator with visible bowl
ENGINE
CONFIGURATION
FUEL CAPACITY
Rear mounted engine, front operator position  Rear mounted radiator  Two post ROPS and seat belt standard
7 5 gallons (28 liters)  2008 models Biodiesel-Ready for use up to B-20 (20% biodiesel and 80% petrol blend)
Series/Parallel hydraulic traction circuit provides continuous 3-wheel drive, in mow and transport  Hydrostatic traction drive  
provides infinitely variable speed in forward and reverse  6 gallon (23 liter) hydraulic system capacity
TRACTION DRIVE
GROUND SPEED
Mow: 0-6 mph (0-10 km/h); Transport: 0-9 mph (0-14 km/h)  Reverse: 0-4 mph  (0-6 km/h)
Forward and reverse traction control pedals, mow/transport lever, hand activated park brake, ignition key switch, tilt steering wheel
lock, PTO switch, throttle, joystick control for cutting unit raise and lower (and for moving cutting units side-to-side on Sidewinder
equipped models), cutting unit transport lock, reel speed and backlap control knob
CONTROLS
GAUGES
Hour meter, fuel gauge, cluster gauge with glow plug and charge indicator lights, and low engine oil pressure and high coolant  
temperature warning lights (high temperature safety shut off)
ELECTRICAL &
INTERLOCKS
12-volt, 585 cold cranking amps at 0° F (-18° C), 40 amps with regulator/rectifier  Traction pedal, operator presence in seat, PTO
engage or disengage, and cutting unit mow or transport safety interlock switches
TIRES
FRAME
Front: 20 x 10-12, 4-ply Turf Trac  Rear: 20 x 12-10
Formed steel, welded steel and steel tubing
Hydrostatic service brake, parking brake
Power steering with tilt steering wheel
BRAKES
STEERING
Track Width:
Wheel Base:
55" (140 cm)
56" (142 cm)
Overall Height:
Transport Width:
71" (180 cm) with ROPS
OVERALL
DIMENSIONS
80" (203 cm) in 72" (183 cm) woc  
92" (234 cm) in 85" (216 cm) woc
1860 lbs  (844 kg)
Overall Length:
93" (248 cm)
Approx  Weight with Cutting units:
CUTTING UNIT
CONFIGURATION
Operator controlled moveable cutting units travel ±12" (30 cm)  
left or right from center; total of 24" (61 cm) of infinite variability
Fixed position cutting units
CUTTING UNIT
OFFSET
3" (7 6 cm) in 72" (183 cm) width of cut
10" (25 cm) in 85" (216 cm) width of cut
Maximum 15" (38 cm) in 72" (183 cm) width of cut  
Maximum 22" (56 cm) in 85" (216 cm) width of cut
This product complies with the American National Standards Institute (ANSI B71-4 – 1999) and European Community  
specifications (CE Certified)
CERTIFICATION
WARRANTY
Two-year limited warranty, refer to operators manual for details
CUTTING UNITS
TYPE
REEL BLADE OPTIONS
HOC RANGE
Three hydraulically-driven, balanced, 7" (17 8 cm) diameter reels  Cutting units interchangeable to all three positions
5, 8, and 11-blade reels available for 27" (68 6 cm) cutting unit  5 and 8 blade reels available for 32" (81 3 cm) cutting unit
Height of cut ranges  25" to 2" ( 63 - 5 1 cm) standard in floating position, 1 5" to 2 5" (3 8 - 6 4 cm) in fixed position  
72" (183 cm), or 85" (216 cm) width of cut dependent on cutting unit selection
CUTTING WIDTH
CLIP FREqUENCY/
BACKLAPPING
Manually controlled variable reel speed for adjustment of clip frequency  Standard on-board backlapping
BEDKNIFE TO REEL
ADjUSTMENT
Dual point adjustment (DPA) of bedknife to reel  
ROLLERS
Full roller standard on rear of cutting unit and plastic front Wiehle roller
SUNSHADE
BIMINI CANVAS
Model 30358
*Specifications and design subject to change without notice
The Reelmaster 3100-D is manufactured
in Tomah, WI  ISO 9002 Certified Plant
51
Product Specification
CategoriesLawn Mower Manual, Toro Lawn Mower Manual
Tags
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 1 page
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website