Reelmaster® 5500-D Specifications*
REELMASTER 5500-D 2WD, MODEL 03550
REELMASTER 5500-D 4WD, MODEL 03551
Kubota
®
3-cylinder, liquid-cooled turbo diesel. 35 hp (26.2 kW) gross rated, 31.5 hp (23.6 kW) net @ 3000 RPM. Pressurized
ENGINE
lubrication system with 4.0 U.S. quart (3.8 liter) capacity. Heavy-duty three-stage, radial seal air cleaner with dust bowl and restriction
indicator. Replaceable spin-on fuel filter/water separator with visible bowl. 10 gallon (37.8 liter) diesel fuel capacity.
Mid-mounted air intake with 17" (43.1 cm) diameter, 10-blade cooling fan. Industrial tube and fin construction radiator, 7 fins per inch,
with a 7.5 quart (7.1 liter) capacity.
COOLING
FUEL CAPACITY
10 gallon (37.9 liter) diesel fuel.
Front drive wheels powered via hydrostatic transmission coupled to a mechanical automotive-style drive axle. 4WD model equipped
TRACTION DRIVE
GROUND SPEED
with Toro 4-Matic on-demand, 4-wheel drive, which connects the transmission to a mechanical rear axle by a drive shaft with an
® ®
over-running clutch.
0-10 mph (0-16.1 km/hr) forward for transport or mow; 0-4 mph (0-6.4 km/hr) reverse.
Front traction tires: 26.5 x 14-12 turf type, rear steering tires: 20 x 10-10. Forward speed range of 0-10 mph (0-16.1 kph). Reverse
speed of 0-4 mph (0-6.4 kph).
TIRES
MAIN FRAME
BRAKES
All welded formed steel frame, includes three tie-down loops.
Individual left and right drum-type wheel brakes. Brakes may be actuated individually as service brakes, or together for transport or
parking brakes. Dynamic braking through hydrostatic traction drive system.
STEERING
Power steering with dedicated power source.
Hour meter, speedometer, fuel gauge, engine coolant temperature gauge, and warning light cluster: engine oil pressure, high engine
temperature, charge indicator, glow plug indicator. Safety interlock switches for parking brake, traction pedal in neutral, PTO
engagement, and operator presence in seat.
GAUGES &
WARNINGS
The Automatic Control Electronics, ACE™ system allows precision timing and control of machine functions for maximum reliability.
Available diagnostic display connects to an electronic control unit to pinpoint any electrical problems quickly and easily.
Available DATA LOG™ system allows mechanic to find intermittent problems.
DIAGNOSTICS
CONTROLS
Single foot-operated traction pedal with adjustable traction speed control. Foot-operated service and parking brakes. Hand-operated
key ignition switch, throttle, reel speed control, cutting unit raise/lower joystick, cutting unit PTO lever, parking brake release knob.
12 volt maintenance free battery, 530 CCA. Electronic control unit is a microprocessor based, solid state control unit with diagnostic
capabilities. Traction pedal, operator presence in seat, PTO engage or disengage safety interlock switches, parking brake switch
and individual circuit backlap switches.
ELECTRICAL &
INTERLOCKS
REEL SPEED
CONTROL
Reel drive circuit is split into front and rear independent circuits. Hydraulic functions controlled by an integrated hydraulic
control block. Reel speeds are manually adjustable between 200-1600 RPM (200 RPM in backlap).
SEAT
Deluxe high back suspension seat with adjustable fore and aft travel, and weight and height adjustment.
Height
59" (149 cm); 82" (208 cm) w/ROPS
Length (w/o baskets)
113" (287 cm)
Wheel Base
62" (157 cm)
Transport Width
88" (223 cm)
Wheel Tread
72" (182 cm)
OVERALL DIMENSIONS
WEIGHT
CERTIFICATION
WARRANTY
2,962 lbs. (1,344 kg) w/7 blade cutting units and full fluids.
Complies with ANSI B71.4 - 1999 and CE requirements when equipped with necessary weights or added ballast.
Two year limited warranty, refer to the Operator’s Manual for details.
5, 7 AND 11-BLADE CUTTING UNITS, MODELS 03860, 03861, 03862
22" (95 cm) wide hydraulically driven, balanced cutting units with 7" (17 cm) diameter reels. Cutting units interchangeable to all
positions. Weight transfer standard.
TYPE
SIZE
22" (56 cm) wide cutting units, 7" (18 cm) diameter reels.
100" (254 cm).
WIDTH OF CUT
3
/8 - 13/4" (9.5 - 32 mm) total range. Recommended use: 5-blade 1-1.75" (25.4 - 44.4 mm); 7-blade .5-1" (12.7 - 25.4 mm);
HOC RANGE
11-Blade 8
3/ - 5/8" (9.5 - 15.8 mm).
CLIP FREQUENCY/
BACKLAPPING
Manually controlled, variable reel speed for control of clip frequency. Maximum reel speed of 1,650 rpm. Standard
on-board backlapping.
BEDKNIFE/BEDBAR
ROLLERS
Single point adjustment (SPA) of bedknife to reel.
3" (7.6 cm) diameter, deep groove Wiehle
®
front roller. 3" (7.6 cm) diameter full rear rear roller. Other roller configurations optional.
GROOMER KIT, MODELS 03810 AND 03811
20" (50.8 cm).
CUTTER WIDTH
.188-2" (4.8-51 mm) above ground level, at mowing height-of-cut range of
(4.8 mm) below height of cut when engaged in grass; .25" (6.4 mm) above height of cut when raised out of grass.
3/8 -1.75" (9.5-44 mm). Height of Groom (HOG): .188"
DEPTH PENETRATION
Shaft: fatigue-proof steel hexagon. Blades: heat-treated steel, .042" (1 mm) thick, 2.5" (6.4 cm) diameter, .5" (1.3 cm) spacing between
blades.
CONSTRUCTION
WEIGHT
15 lbs. (6.8 kg).
* Specifications and design subject to change without notice. Products depicted in this literature are for
The Reelmaster 5500-D is manufactured
demonstration purposes only. Actual products offered for sale may vary in design, required attachments
and safety features. Consult your Toro Distributor.
in Tomah, WI ISO 9002 Certified Plant.
| Categories | Lawn Mower Manual, Toro Lawn Mower Manual |
|---|---|
| Tags | Toro Reelmaster 5500-D |
| Download File |
|
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)