Reelmaster Frames & Cutting Units Specifications* (continued)
®
REELMASTER GANG MOWERS - 5-BLADE, MODEL 01005; 7-BLADE, MODEL 01007; 11-BLADE, MODEL 01011
Reel Type
5-Blade w/16" (40.6 cm) wheels
5-Blade w/18" (45.7 cm) wheels
7 Blade
Turf Application
Semi-formal
Informal (rough)
Formal
Width of Cut
30" (76.2 cm)
30" (76.2 cm)
30" (76.2 cm)
30" (76.2 cm)
TYPE OF MOWING
11 Blade
Super-formal
Reel Type
Recommended HOC Range
11-Blade w/16" (40.6 cm) wheels
7-Blade w/16" (40.6 cm) wheels
5-Blade w/16" (40.6 cm) wheels
5-Blade w/18" (45.7 cm) wheels
1/2" - 11/ " (12.7 mm - 45 mm)
4
3/ " - 13/ " (19 mm - 45 mm)
HEIGHT OF CUT (HOC)
HOC ADJUSTMENT
4
4
11/ " - 21/ " (32 mm - 57 mm)
4
4
2" - 3" (51 mm - 76 mm)
Roller brackets adjust the height of cut, offering 53 individual settings in .040" (1 mm) increments.
5-Blade:
7-Blade:
8 1/ " (20.4 cm) diameter with 5 medium carbon steel induction hardened blades.
16
8 1/ " (20.4 cm) diameter with 7 medium carbon steel induction hardened blades.
16
REEL CONSTRUCTION
11-Blade: 7 1/ " (18 cm) diameter with 11 medium carbon steel induction hardened blades.
16
All Reels: blades are welded to seven, 7 gauge, steel spiders. 11/2" (3.8 cm) diameter shaft on tapered roller bearings with adjustment
nut to compensate for bearing wear. Blade hardness at cutting edge is Rc 44-51.
CHASSIS
CONSTRUCTION
Ribbed cast iron gear cases with tubular cross member. Front cross member provides lift point for the cutting unit to all Toro
Reelmaster Frames. Front cross member provides frame rigidity.
Two ground engaged wheels transmit power to gear train in both sides. Machine cut hardened steel gears and clutch idler gear;
REEL DRIVE
75T
ring gear to 10T pinion gear through 14T disengaging idler gear. All gears are sealed from dirt. Reel to wheel speed ratio: 7.5:1.
DIFFERENTIAL
The differential provides disengaging overrunning idler gear in the gear train to disengage reel for free wheeling in turns and transport.
Inch
.58"
.91"
1.28"
1.51"
Millimeter
14.7 mm
23.1 mm
32.5 mm
38.3 mm
Wheel Diameter
16" (40.6 cm)
16" (40.6 cm)
16" (40.6 cm)
18" (45.7 cm)
Cuts Per Meter
11-Blade
7-Blade
5-Blade
5-Blade
68
43
31
26
AVERAGE CLIP
FREQUENCY
BEDKNIFE-TO-REEL
ADJUSTMENT
Bedknife adjusts against reel positively with a single hand-controlled knob located at center of bedbar. Adjustment knob contains
detent with .001" (.025 mm) movement of bedknife for each indexed position. No tools required. Top pivot points are greaseable.
High carbon steel bedknife attached to a fabricated steel bar; single screw adjustment pivots at three points on vibration isolating
bushings with eccentric shoulder bolt leveling adjustment. Bedknife hardness is Rc 40-51.
BEDKNIFE & BEDBAR
CUTTING UNIT
SUSPENSION
Drawbar attaches to two low pull points on cross tube. Chain pick up at center of cutting unit for transportation. System allows for
flotation in all directions in mowing mode.
3
grit and moisture. Roller brackets adjust the height of cut.
1/2" (8.9 cm) diameter steel roller has greaseable tapered roller bearings with a double lip oil seal and wear sleeve to help keep out
REAR ROLLER
BEARINGS
The reel, roller and wheels have adjustable tapered roller bearings.
LUBRICATION
Gears and bearings are continuously lubricated from main reservoirs filled with 16 ounce (473 ml), 80-90 weight gear oil.
FRAME
APPLICATIONS
5 or 7 unit Reelmaster Transport Frame, 3 unit Reelmaster Lift Frame of 3, 5 or 7 unit Reelmaster Universal Frames. See Reelmaster
Frame sales specification literature for more details.
OVERALL WEIGHTS[1] & DIMENSIONS (APPROXIMATE)
5-Blade
Model 01005
7-Blade
Model 01007
11-Blade
Model 01011
Wheel Tread
Width
Height
16" dia.
18" dia.
w/ Semi-pneumatic Wheels, Model 01304
w/ Pneumatic Wheels, Model 01323
w/ Steel Wheels, Model 01336
w/ Semi-pneumatic Wheels, Model 01035
239 lbs. (108.4 kg)
225.5 lbs. (102.2 kg)
237 lbs. (107.5 kg)
252 lbs. (114.3 kg)
244 lbs. (110.6 kg)
230.5 lbs. (104.5 kg)
242 lbs. (109.7 kg)
N/A
248 lbs. (112.5 kg)
234.5 lbs. (106.3 kg)
246 lbs. (111.6 kg)
N/A
16" (40.6 cm)
16" (40.6 cm)
16" (40.6 cm)
18" (45.7 cm)
413/8" (105 cm)
413/8" (105 cm)
413/8" (105 cm)
453/16" (114.7 cm)
16" dia.
16" dia.
OPTIONAL ACCESSORIES
Description
Part No.
47-4540
Roller Scraper Kit
47-5390 (11-blade) 51-0800 (5-blade, 7-blade)
Grass Dispersion Shield Kit
* Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only. Actual products offered for sale may vary in design,
required attachments and safety features. Consult your local Toro Distributor.
[1] Weights exclude drawbars.
- 2 of 2
- « Previous
- 1
- 2
Categories | Lawn Mower Manual, Toro Lawn Mower Manual |
---|---|
Download File |
|
Document Type | Specifications |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)