Super 700 Series
Bidding Specifications(cont.)
Recommended
Installation Instructions
The body and cap of the sprinkler
shall be injection molded from ABS, a
non-corrosive, impact-resistant, UV-
High-Pop Version
The sprinkler shall be of pop-up
The Super 700 Series sprinklers are
designed to provide the maximum in
performance and versatility for medium
range turf and ground cover areas,
performing in the 20'–52' radius range.
Pop-up and high-pop versions of the
Super 700 are mountable at grade. It is
recommended that they be mounted on
swing joints or on flexible poly pipe,
particularly in areas where you can
logically expect pedestrian traffic or normal
maintenance operation such as mowing.
Swing joints should be specified as triple
swing joints, allowing movement up and
down, laterally, or at an angle to the plane
of installation. Flexible poly pipe will allow
the same movement and is generally less
expensive to install even when including
the cost of saddles, tees, elbows, and any
clamps. Toro Super Funny Pipe and
adapters are rated at 400 psi burst and may
eliminate the use of some clamps.
High-pop versions allow full 12"
design with an overall height of 16
" and a pop-up
". The sprinkler shall be
sized to prevent entry of foreign material capable of installation at grade level and
1
⁄2", a
resistant, heavy-duty plastic material. The body diameter of 2
3
⁄
8
sprinkler shall have a plastic filter screen
stroke of 10
1
⁄
2
to the nozzle. All components shall be
removable from the top of the sprinkler
case.
The sprinkler shall have a single-
piece riser/body seal that regulates
flushing during pop-up and retraction to
clear any debris from around the riser,
and a heavy-duty, stainless-steel spring to
ensure positive retraction. The seal shall
be a single piece injection molded from
Santoprene≠, a synthetic rubber.
The sprinkler shall be capable of
accepting any one of 21 nozzles. The
nozzles shall be color-coded and
available in three trajectories.
Rotation shall be accomplished by a
sealed, oil-packed gear drive assembly
isolated from the water supply and driven
by a variable stator that maintains a
constant speed of rotation with all
nozzles. The variable stator shall require
no adjustments when changing nozzles.
The sprinkler shall employ a modular,
interchangeable nozzle technology. Any
individual nozzle shall be easily removed,
installed and locked if field adjustment is
required.
A standard pop-up, non-commercial
model shall be available with a check
valve which shall maintain 10' of
elevation change. A lavender effluent
water use indicator is available and can
shall have a ⁄4" NPT female inlet.
3
Lawn Version
The sprinkler shall be of pop-up
design with an overall height of 7", a
body diameter of 3" and a pop-up stroke
of 3". The sprinkler shall be capable of
installation at grade level and shall have a
3
⁄" NPT female inlet.
4
Commercial Version
The sprinkler shall be of pop-up
design with an overall height of 7", a
body diameter of 2⁄" and a pop-up
3
8
stroke of 3". The sprinkler shall have a
standard locking cap to provide vandal
resistance. It shall be supplied with a
standard check valve which shall hold 10'
of elevation change. The riser assembly
shall be encased in stainless steel for
increased vandal resistance and
durability. The sprinkler shall be capable
of installation at grade level and shall
4
have a ⁄" NPT female inlet.
3
pop-up and may be of considerable value
in flower beds, low shrubs or ground
covers.
Shrub versions are mountable above
grade on fixed risers or swing joints. As
such, they are never recommended for
those areas where you expect traffic,
whether pedestrian or vehicular. Shrub
versions may be mounted on swing joints
with extension risers to bring them above
ground level.
The S700 nozzles are engineered to
provide a smooth, consistent curtain of
water across the arc. Provision is made for
1 3
2 4
shall have a ⁄" or ⁄" NPT female threaded
at-head coverage. Accordingly, it is
inlet.
recommended that sprinklers be located
2" from walks, curbs, hardscaping, mow
strips, header boards and edges of lawn.
In addition, sprinklers should be placed
6"–12" from buildings. Such location will
allow normal maintenance procedures
such as mowing to be accomplished and
also minimize spray on buildings.
Normal at-head spray as well as
Shrub Version
The sprinkler shall be of shrub design
with an overall height of 5⁄" and a base
1
8
diameter of 1 ". The sprinkler shall be
capable of mounting above grade and
3
⁄
4
be press fit into the nozzle. A ⁄" NPT
3
4
plug shall be provided with all side inlet
models to plug the unused inlet.
The sprinkler shall be developed and
manufactured by an ISO 9001-certified
facility. The sprinkler shall be a model
number _____________________ and
shall be manufactured by The Toro
Company, Irrigation Division, Riverside,
California, USA.
capillary movement of the water will
ensure adequate coverage when
backspaced.
All nozzles are supplied with a radius
adjustment screw which allows 25%
reduction to fill in irregular areas. Such
radius reduction does not reduce flow,
however, a balance in precipitation rates is
maintained. Thus, any combination of arcs
can be valved together as long as the basic
balancing scheme is adhered to,
potentially saving both valves and
controller stations.
Three trajectories are available and are
color-coded for ease of identification.
Black = 25°, Gray = 15° and Beige = 7°.
SEPTEMBER 2000
- 2 of 3
- « Previous
- 1
- 2
- 3
- Next »
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro Super 700 |
| Download File |
|
| Document Type | Catalog |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)