RULES FOR SAFE OPERATION
13.
14.
Wear rubber boots when operating the snow mover.
WHILE OPERATING
MINIMUM WIRE GAUGE RECOMMENDATIONS
Cautionary statements regarding the use of proper
clothing and footwea during operations to reduce the
risk of injury that may be caused by flying debris.
Operation of the snow mover in the hand-held posi-
tion is unsafe, except in accordance with the special
instructions for such use provided in the operator’s
manual.
WARNING - This snow mover should be grounded
while in use to protect the operator form electric
shock. To prevent electric shock use only with an
extension cord suitable for outdoor use.
EXTENSION CORD - To prevent disconnection of
snow mover cord from the extension cord during
operation.
1.
2.
Walk, never run.
EXTENSION CORD
LENGTH
WIRE SIZE
REQUIRED
VOLTS
Be sure the snow thrower is not in contact with any-
thing before staring the unit.
25
feet / 7.5m
50 feet / 15m
feet / 30m
*American Wire Gauge
18 A.W.G.*
16 A.W.G.*
16 A.W.G.*
15.
16.
120
3.
4.
5.
Stay away from the discharge opening at all times.
Keep face, hands, and feet away from concealed
moving or rotating parts.
100
Be attentive when using the snow thrower, and stay
alert for holes in the terrain and other hidden hazards
or traffic.
Do not use on a gravel surface or crushed rock sur-
faces.
Use
extreme
caution
when
crossing
17.
18.
gravel/crushed rock drives, walks, or roads.
6.
7.
Never clear snow from steep slopes.
Never attempt to use the snow thrower on a roof or
any steep, inclined, slippery surfaces.
AVOID ACCIDENTAL STARING - Don’t carry
plugged - in snow mover with finger on switch. Be
sure switch is off when plugging in.
8.
9.
Never operate snow thrower without proper guards,
plates or other safety protective devices in place.
19.
20.
If cord is damaged in any manner while plugged in,
pull extension cord from wall receptacle.
DON’T ABUSE CORD - Never carry snow mover by
cord or yank it to disconnect from receptacle. Keep
cord from heat, oil, and sharp edges.
Keep hands away from moving parts.
Keep guards in place and in working order.
DON’T FORCES SNOW MOVER - It will perform
better and safer at the rate for which it was
designed.
Never operate the snow thrower near glass enclo-
sures, automobiles, trucks, window wells, dropoffs,
etc. without proper adjustment of the snow discharge
angle. Keep children and pets away.
21.
22.
23.
10. Don’t force or overload the snow thrower. The snow
thrower will perform at its best and safest when it is
run at the rate for which it was designed.
11. Never direct discharge towards people or allow any-
one in front of the unit while operating.
24.
25.
DON’T OVERREACH - Keep proper footing and
balance at all times.
If the snow mover strikes a foreign object follow
these steps:
i) Stop snow mover.
ii) Inspect for damage.
iii) Repair any damage before restarting and operat-
ing the snow mover.
DISCONNECT SNOW MOVER - Disconnect the
snow mover from the power supply when not in use,
before servicing, when changing accessories, and
the like.
STORE IDLE SNOW MOVERS INDOORS - When
not in use, snow movers should be stored indoors in
dry, locked-up place - out of reach of children.
MAINTAIN SNOW MOVERS WITH CARE - Follow
instructions for lubricating and changing acces-
sories.
12. Wear safety glasses or goggles that are marked as
meeting ANSI Z87.1 standards, and ear/hearing pro-
tection when operating this unit.
13.
14.
Use the unit only in daylight or good artificial light.
Avoid accidental starting. Remain in the starting posi-
tion whenever starting the unit. The operator and unit
must be in a stable position while starting.
15.
16.
17.
18.
Use the right tool. Only use this tool for the purpose
intended.
26.
Do not overreach. Always keep proper footing and
balance.
Always hold the unit with both hands when operating.
Keep a firm grip on handles or grips.
27.
28.
29.
Keep hands, face, and feet at a distance from all
moving parts. Do not touch or try to stop the rotor
when it is rotating.
19.
If the rotor will not rotate freely due to frozen ice, thaw
the unit thoroughly before attempting to operate it
under power.
Don’t use any other accessory or attachment might
incrase the risk of injury.
20.
21.
Keep the rotor clear of debris.
Never attempt to clear the rotor with the motor run-
ning. Turn the motor off first and unplug the extension
cord.
4
| Categories | MTD Snow Blower Manuals, Snow Blower Manuals, Yard Machines Snow Blower Manuals |
|---|---|
| Tags | MTD 31A-020-900, MTD Snow Blower Manual |
| Download File |
|
| Document Type | Owner's Manual |
| Language | English |
| Product Brand | Yard Machines, 31A-020-900, Snow Blower |
| Document File Type | |
| Publisher | mtdproducts.com |
| Wikipedia's Page | MTD Products |
| Copyright | Attribution Non-commercial |
(1 votes, average: 2 out of 2)
Lawn and Garden readers have rated Yard Machines 31A 020 900 Snow Blower Owners Manual by MTD 2.0 out of 2.0 based on 1 product reviews. so far I am happy will know more when I have that which was specified