GENERAL INFORMATION
NOTE: Follow these carburetor adjustment proce-
dures carefully. An incorrectly adjusted carburetor can
cause severe engine damage.
needles clockwise until they are lightly seated.
Then turn the needles counterclockwise the follow-
ing number of turns:
1
Make sure the unit is fully assembled before making
carburetor adjustments:
High Speed Mixture Needle: 1-1/4 turns
For trimmers and brush cutters, make sure the boom,
cutting head, and line guard are installed and the cut-
ting line is extended to its full cutting length.
Idle Mixture Needle:
1-1/4 turns
For cultivators, make sure the boom and gear box are
installed.
NOTE: Turn the high speed mixture and idle mix-
ture needles finger-tight. Do not force the needles
with a screwdriver as this can damage the tips of
the needles and the seats in the carburetor body.
For blowers and blower-vacs, make sure the blower
tube and nozzle are installed.
The carburetor has three basic adjustments: the idle
speed adjustment, the idle mixture adjustment, and
the high speed mixture adjustment (Figure 1-12).
5.
Start engine and allow it to warm up for 3 to 5 min-
utes.
(H) High Speed
NOTE: For the following steps, use a magnetic
pick-up 2-cycle engine tachometer to monitor en-
gine speed.
Mixture Needle
(L) Idle
Mixture Needle
6.
Final High Speed Mixture Setting: Squeeze the throt-
tle trigger to the FULL (WIDE OPEN) THROTTLE
position. Turn the high speed mixture needle clock-
wise or counterclockwise to set the high speed
RPM:
Idle Speed
Trimmers and Cultivators: 6,800 to 7,200 RPM
Blowers and Blower-Vacs: 6,600 to 7,200 RPM
Figure 1-12. Carburetor Adjustments.
3.6081.012
1.
2.
Remove air filter cover assembly as instructed in
Part 3 — Engine Disassembly.
7.
8.
Release the throttle trigger and let the engine idle. If
the engine stops, turn the idle speed screw clock-
wise 1/8 turn at a time until the engine idles.
Initial Idle Speed Setting: Turn idle speed screw
counterclockwise until it does not touch the throttle
lever. Now turn the screw clockwise until it just
touches the throttle lever; then continue turning 2
full turns.
Final Idle Mixture and Idle Speed Settings: Adjust
the the idle mixture and idle speed as follows:
a.
Turn the idle mixture needle clockwise until the
fastest idle RPM is reached; then turn the nee-
dle counterclockwise 1/8 turn.
3.
4.
If so equipped, remove the rubber cap from the high
speed mixture adjustment needle.
b.
Squeeze the throttle trigger. If the engine falters
or hesitates as it accelerates, turn the idle mix-
ture needle counterclockwise 1/16 turn at a
time until the engine accelerates rapidly.
Initial High Speed Mixture and Idle Mixture Settings:
Turn both the high speed mixture and idle mixture
1-13
| Categories | Blower Vacuum and Sweeper Manuals, Toro Blower and Vacuum Manuals |
|---|---|
| Tags | Toro 62901, Toro 62902 |
| Model Number | 62901, 62902 |
| Model Year | 1996, 1997, 1998 |
| Download File |
|
| Document Type | Service Manual |
| Language | English, Français, Español |
| Serial Number | 690000001 - 699999999, 790000001 - 799999999, 890000001 - 899999999 |
| Product Name | Gas Blower Vacuum |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Blowers, Vacuums |
| Product Type | Blower, Vacuum |
| Product Series | Gas Powered, Lawn Vacuum / Sweeper / Blower |
| Discharge | 130 mph/300 cfm |
| Engine Manufacturer | Ryobi |
| Engine Motor Model # | A-31 |
| Engine Motor Size | 31cc |
| Engine Motor Type | 2 Cycle CARB1, EPA1 |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)