6.
Install the new scraper to the housing using the
carriage bolts and locknuts.
4. Loop the new drive belt around the engine pulley,
under the idler pulley, over the roller, through the
brake assembly, and around the rotor pulley (Fig. 18).
Replacing the Drive Belt
IMPORTANT: The drive belt must be on top of the roller
as shown in Figure 18.
Inspect the drive belt before each season, and replace it if
it is worn or damaged.
5.
Install the drive belt cover. Tighten the fasteners
securely, but do not overtighten.
1.
2.
Stop the engine.
Replacing the Spark Plug
Remove three self tapping screws, two capscrews, one
washer, and two locknuts that secure the belt cover to
the snowthrower frame (Fig. 17). Set the drive belt
cover aside.
Before each season, check the spark plug. If the electrodes
in the center of the plug are dark or have deteriorated,
install a new NGK BPMR4A spark plug.
1.
Remove the three mounting screws that secure the
control panel to the housing (Fig. 19).
3
2
1
1
4
631
Figure 17
1.
2.
Cap screw, locknut
3.
4.
Long self tapping screw
Short self tapping screws
Capscrew, locknut,
washer
2
643
3.
Push down on the idler pulley and remove the drive
belt from the rotor pulley, the brake arm assembly, and
the engine pulley (Fig. 18).
Figure 19
1.
Control panel
2. Mounting screws
2
2.
3.
Remove the ignition key and lift off the panel,
allowing it to hang on the recoil rope.
1
4
Pull the wire off the spark plug and remove the spark
plug (Fig. 20).
6
1
628
3
Figure 20
5
626
1.
Spark plug wire
Figure 18
1.
2.
3.
Engine pulley
Idler pulley
Roller
4.
5.
6.
Brake arm assembly
Rotor pulley
4. Examine the spark plug and replace it if it is cracked,
fouled, or dirty.
Belt guide
IMPORTANT: Do not sandblast, scrape, or clean the
spark plug. Dirt may fall into the cylinder and cause
engine damage.
14
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38413, Toro CCR 2450 |
| Model Number | 38413 |
| Model Year | 2000 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 000000001 - 000999999 |
| Product Name | Toro CCR 2450 Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | CCR 1000/2400/2500, Snowthrower |
| Swath | 20 inch |
| Discharge | Single Stage |
| Engine Manufacturer | Toro |
| Engine Oil Type | Toro 2 cycle / NMMA-TCW3 |
| Engine Motor Model # | R-tek |
| Engine Motor Size | 5 hp |
| Engine Motor Type | 2 Cycle EPA1 |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)