Toro CCR 2450 GTS 38413 Snow Blower Operators Manual, 2000

This manual uses two other words to highlight
information. Important calls attention to special
mechanical information and Note emphasizes general
information worthy of special attention.
Do not operate the equipment without wearing
adequate winter garments. Wear footwear which will
improve footing on slippery surfaces.
Handle fuel with care; it is highly flammable.
Safety
Use an approved fuel container.
Never add fuel to a running or hot engine.
To ensure maximum safety, best performance, and to
gain knowledge of the product, it is essential that you
and any other operator of the snowthrower read and
understand the contents of this manual before the
motor is ever started. Pay particular attention to the
Fill fuel tank outdoors with extreme care. Never
fill fuel tank indoors.
Replace gasoline caps securely and wipe up spilled
fuel.
safety alert symbol
which means CAUTION,
Use only the power cord supplied with the
snowthrower and a receptacle appropriate for use with
the cord for electric starting motors.
WARNING, OR DANGER — “personal safety
instruction.” Read and understand the instruction
because it has to do with safety. Failure to comply with
instruction may result in personal injury.
Adjust the collector (auger) housing height to clear
gravel or crushed rock surface (this is not necessary on
single-stage snowthrowers).
The snowthrower is designed and tested to offer
reasonably safe service; however, failure to comply with
the following instructions may result in personal
injury.
Never attempt to make any adjustments while the
engine is running, except where specifically
recommended by manufacturer (Toro).
General Snowthrower Safety
Let engine and machine adjust to outdoor temperatures
before starting to clear snow.
The following instructions have been adapted from the
ANSI/OPEI standard B71.3—1995 and ISO standard
8437:1989. Information or terminology specific to Toro
snowthrowers is enclosed in parenthesis.
The operation of any powered machine can result in
foreign objects being thrown into the eyes.  Always
wear safety glasses or eye shields during operation or
while performing an adjustment or repair.
Training
Operation
Read the operator’s manual carefully. Be thoroughly
familiar with the controls and the proper use of the
equipment. Know how to stop the unit and disengage
the controls quickly.
Do not put hands or feet near or under rotating parts.
Keep clear of the discharge opening at all times.
Exercise extreme caution when operating on or
crossing gravel drives, walks, or roads. Stay alert for
hidden hazards or traffic.
Never allow children to operate the equipment. Never
allow adults to operate the equipment without proper
instruction.
After striking a foreign object, stop the engine, remove
the wire from the spark plug, thoroughly inspect the
snowthrower for any damage, and repair the damage
before restarting and operating the snowthrower.
Keep the area of operation clear of all persons,
particularly small children and pets.
Exercise caution to avoid slipping or falling, especially
when operating in reverse.
If the unit should start to vibrate abnormally, stop the
engine and check immediately for the cause. Vibration
is generally a warning of trouble.
Preparation
Stop the engine whenever you leave the operating
position, before unclogging the collector
(auger)/impeller housing or discharge guide (chute),
and when making any repairs, adjustments, or
inspections.
Thoroughly inspect the area where the equipment is to
be used and remove all doormats, sleds, boards, wires,
and other foreign objects.
Disengage all clutches and shift into neutral before
starting the engine.
When cleaning, repairing, or inspecting, make certain
the collector/impeller (auger/impeller or rotor blades)
and all moving parts have stopped. Disconnect the
3
Product Specification
CategoriesSnow Blower Manuals, Toro Snow Blower
Tags,
Model Number38413
Model Year2000
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 20 pages
Document TypeOperator's Manual
LanguageEnglish
Serial Number000000001 - 000999999
Product NameToro CCR 2450 Snowthrower
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower
Product TypeSnowthrower
Product SeriesCCR 1000/2400/2500, Snowthrower
Swath20 inch
DischargeSingle Stage
Engine ManufacturerToro
Engine Oil TypeToro 2 cycle / NMMA-TCW3
Engine Motor Model #R-tek
Engine Motor Size5 hp
Engine Motor Type2 Cycle EPA1
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website