AUGER GEARBOX
3.
Remove the two carriage bolts on the chute control
rod (Fig. 086).
GEARBOX INSTALLATION
1.
Apply a light coat of anti-seize to the auger shafts
and the impeller shaft. Install the impeller and
augers and secure with the capscrews and locknuts.
On models with the pivoting scraper, install the
scraper over the ends of the auger shaft. Slide the
auger shaft bearings on the ends of the auger shaft.
2.
Insert the impeller shaft through the bearing in the
rear of the auger housing. The bearing mounting
bolts should be slightly loose at this time. (Note: if
the auger and traction assemblies are connected,
apply a light coat of anti-seize to the impeller shaft
and install the auger pulley at this time. If not, the
pulley can be installed in step 5.)
3.
4.
Secure the auger shaft bearings to the auger side
plates with 2 capscrews on each side. On models
with the pivoting scraper, install the scraper springs.
Fig 086
MVC-725F
To ensure the impeller shaft bearing has aligned
itself with the shaft, strike it a couple of times with a
rubber mallet. If the auger and traction assemblies
are not separated, use a block of wood. Place it on
the auger shaft and strike the wood with a hammer.
The jolt to the shaft aligns the bearing. Secure the
bearing.
4.
5.
Support the auger and traction with blocks of wood.
Remove three capscrews down each side
connecting the auger to the traction assembly and
separate the sections (Fig. 087).
5.
Apply a light coat of anti-seize to the impeller shaft
and install the impeller pulley. Push the auger shaft
to the rear and push the pulley forward and secure.
There should be no more than 1/8” (3mm) front to
back movement in the shaft.
Fig 087
MVC-1135X
6.
Once separated, the auger pulley is in the open.
Once the pulley and key have been removed,
perform the preceding steps 12-14 to complete
auger removal.
Power Max Service Manual
7-5
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38595, Toro 38597, Toro 38610, Toro 38611, Toro 38614, Toro 38620, Toro 38621, Toro 38622, Toro 38624, Toro 38629, Toro 38630, Toro 38631, Toro 38632, Toro 38634, Toro 38635, Toro 38637, Toro 38637C, Toro 38639, Toro 38640, Toro 38642, Toro 38644, Toro 38650, Toro 38651, Toro 38652, Toro 38654, Toro 38657, Toro Power Max 1028LE, Toro Power Max 1028LXE, Toro Power Max 1128 OXE, Toro Power Max 1128OE, Toro Power Max 1128OXE, Toro Power Max 6000, Toro Power Max 726OE, Toro Power Max 726TE, Toro Power Max 826LE, Toro Power Max 826O, Toro Power Max 828 OXE, Toro Power Max 828LE, Toro Power Max 828LXE, Toro Power Max 828OXE |
| Model Year | 2004, 2005, 2007, 2008, 2009, 2010, 2011 |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Serial Number | 250010001 - 250999999 |
| Product Name | Toro Power Max Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Two Stage Power Max |
| Swath | 26 inch |
| Discharge | Two Stage |
| Engine Manufacturer | Tecumseh |
| Engine Motor Size | 318cc |
| Transmission Speed | 6 Forward/2 Reverse |
| Transmission Type | Friction Disc |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)