4.
Pull the starter handle lightly until you feel resistance,
then pull it sharply (Fig. 6). Allow the rope return to the
handle slowly.
Danger
Adjusting the cutting height levers could bring
your hands into contact with a moving blade and
result in serious injury.
Note: Allow the engine to warm up for at least one minute;
longer in cooler temperatures.
Note: If the engine fails to start after 3 attempts, repeat
•
•
Stop the engine and wait for all movement to
stop before adjusting the cutting height.
Do not put fingers under the housing when
adjusting the cutting height.
steps 2 through 4.
Stopping the Engine
Release the blade control bail. Both the engine and the
blade should stop. If they do not stop properly, contact your
Authorized Service Dealer.
1.
To change the cutting height, pull the cutting height
lever toward the wheel and move it to the desired
position (Fig. 9).
1
Using the Self-propel Drive
A = 1 in. (25 mm)
B = 1-1/2 in. (38 mm)
C = 2 in. (51 mm)
D = 2-1/2 in. (64 mm)
E = 3 in. (76 mm)
To operate the self-propel drive, simply walk forward with
your hands on the upper handle and your elbows at your
sides, and the lawn mower will automatically keep pace
with you. The faster you walk, the farther the handle will
slide and the faster the lawn mower will propel (Fig. 8). To
slow down the mower, simply reduce your walking speed;
to stop the drive, stop walking.
788
Figure 9
1.
Cutting height lever
1
2.
Release the cutting height lever and seat it securely in
the notch.
Note: Set all 4 wheels at the same height.
m-4206
Using the Grass Bag
Figure 8
1.
Nudge here (see note)
Occasionally, you may want to use the grass bag for
bagging lush grass or collecting leaves.
Note: If, when backing up after self-propelling, the lawn
mower does not roll backward freely, nudge the lawn
mower forward about an inch without engaging the
self-propel drive (Fig. 8), then pull the lawn mower
backward.
Installing the Grass Bag
1.
2.
Stop the engine and wait for all moving parts to stop.
Ensure that the discharge door handle is fully forward
and that the pin is engaged in the catch (Fig. 10).
Adjusting the Cutting Height
2
1
You can adjust each wheel individually with the wheel
height adjustment lever. Cutting heights are 1 inch
(25
2-1/2
mm); 1-1/2 inches (38 mm); 2 inches (51 mm);
inches (64 mm); and 3 inches (76 mm).
3
1912
Figure 10
1.
2.
Bag frame on retaining
post
3.
Handle fully forward
(discharge door closed)
Pin contacting latch plate
10
| Categories | Lawn Mower Manual, Toro Lawn Mower Manual |
|---|---|
| Tags | Toro 20036, Toro 20037 |
| Model Year | 2004 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | Español |
| Serial Number | toro_wbmdrsys.pdf | 88 | Lawn-Boy Walk Power Mower Drive Systems |
| Product Name | Toro Super Recycler Mower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Product Type | Walk Behind Mower |
| Product Series | Toro 21" (53cm) 3 in 1 / Recycler |
| Swath | 21 inch |
| Discharge | Recycler |
| Engine Manufacturer | Briggs & Stratton |
| Engine Oil Type | 20 oz. (.6l) 30w or 10w-30 / API SH or higher |
| Engine Motor Model # | 123K02-0114-E1 |
| Engine Motor Size | 6.5 hp |
| Engine Motor Type | 4 Cycle EPA1 |
| Transmission Speed | Personal Pace |
| Transmission Type | Gear |
| Spark Plug | Champion RJ19LM |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(1 votes, average: 5 out of 5)
Lawn and Garden readers have rated Toro 20036 20037 21-Inch Super Recycler Lawn Mower Operators Manual, 2004 5.0 out of 5.0 based on 1 product reviews. This has been a great mower. Just looking for replacement parts from normal wear