Balancing the Blade
2. Remove the cover (Fig. 21).
1.
Check the balance of the blade by placing the center
hole of the blade over a nail or screwdriver shank
clamped horizontally in a vise (Fig. 20).
2
1
281
1007
Figure 21
Figure 20
1.
Belt cover
2. Bolts
Note: You can also check the balance using a commercially
manufactured blade balancer.
3.
Loosen the cable support nut (Fig. 22).
1
2.
If either end of the blade rotates downward, file that end
(not the cutting edge or the end near the cutting edge).
The blade is properly balanced when neither end drops.
2
4
3
Installing the Blade
m-4205
1.
Install a sharp, balanced Toro blade, the accelerator, and
the blade bolt (Fig. 18).
Figure 22
1.
2.
Cable jacket
3.
4.
Nut
Note: The sail part of the blade must point upward
Cable support
Upper handle
(toward the top of the housing).
2.
Torque the blade bolt to 60 ft-lb (82 Nm).
4.
Push the drive bracket down until it contacts the lawn
mower, then hold it in place (Fig. 23).
Warning
2
1
Operating the lawn mower without the accelerator
in place can cause the blade to flex, bend, or break,
resulting in serious injury or death to the operator
or bystanders.
Do not operate the lawn mower without the
accelerator.
m-4273
Figure 23
3.
4.
Return the lawn mower to its upright position.
Connect the wire to the spark plug.
1.
Drive bracket
2. Push here
5.
With the upper handle pushed back as far as possible
and while holding the drive bracket down, pull the cable
jacket down (toward the lawn mower) until there is no
slack in the cable (Fig. 22).
Adjusting the Self-propel Drive
Cable
6.
Tighten the nut on the cable support (Fig. 22).
Whenever you change the handle height, install a new
self-propel cable, or the traction drive belt slips, adjust the
self-propel drive cable.
7. Release the drive bracket.
Install the belt cover.
8.
1.
Stop the engine and wait for all moving parts to stop.
17
| Categories | Lawn Mower Manual, Toro Lawn Mower Manual |
|---|---|
| Tags | Toro 20036, Toro 20037 |
| Model Year | 2004 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | EspanĚol |
| Serial Number | toro_wbmdrsys.pdf | 88 | Lawn-Boy Walk Power Mower Drive Systems |
| Product Name | Toro Super Recycler Mower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Product Type | Walk Behind Mower |
| Product Series | Toro 21" (53cm) 3 in 1 / Recycler |
| Swath | 21 inch |
| Discharge | Recycler |
| Engine Manufacturer | Briggs & Stratton |
| Engine Oil Type | 20 oz. (.6l) 30w or 10w-30 / API SH or higher |
| Engine Motor Model # | 123K02-0114-E1 |
| Engine Motor Size | 6.5 hp |
| Engine Motor Type | 4 Cycle EPA1 |
| Transmission Speed | Personal Pace |
| Transmission Type | Gear |
| Spark Plug | Champion RJ19LM |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(1 votes, average: 5 out of 5)
Lawn and Garden readers have rated Toro 20036 20037 21-Inch Super Recycler Lawn Mower Operators Manual, 2004 5.0 out of 5.0 based on 1 product reviews. This has been a great mower. Just looking for replacement parts from normal wear