Figure 51
1.
2.
Spacer
3.
Roller bracket
Sideplate mounting flange
Figure 53
•
Position the spacer below the sideplate mounting
flange when height of cut settings range from
1.
Sideplate mounting bolts
1/8"
to 1" (Figure 52).
Important: Whenever the cutting unit has to
be tipped to expose bedknife/reel, prop up rear
of cutting unit to make sure nuts on back end
of bedbar adjusting screws are not resting on
work surface.
Adjusting the Bedknife to the
Reel
Bedknife to reel adjustment is accomplished by
loosening or tightening bedbar adjusting screws, located
on top of mower.
Figure 52
1.
2.
Sideplate mounting flange
Spacer
3. Roller bracket
1. Position machine on a flat, level work surface.
2.
Make sure reel contact is removed by turning bedbar
adjusting screws counterclockwise (Figure 54).
2.
To adjust rear roller proceed as follows:
•
•
•
Raise rear of cutting unit and place a block under
bedknife.
Remove (2) nuts securing each roller bracket and
spacer to each sideplate mounting flange.
Lower roller and screws from sideplate mounting
flanges and spacers.
•
•
Place spacers onto screws on roller brackets.
Re-secure roller bracket and spacers to underside
of sideplate mounting flanges with nuts
previously removed.
Figure 54
3.
Verify that the bedknife to reel contact is correct. Tip
mower to expose front and rear rollers and bedknife.
1.
Bedbar adjusting screw
Note: The position of the rear roller to the
reel is controlled by the machining tolerances of
the assembled components and paralleling is not
required. A limited amount of adjustment is possible
by setting the cutting unit on a surface plate and
loosening the sideplate mounting bolts (Figure 53).
Adjust and re-tighten bolts.
3.
Tilt mower on back to expose bedknife and reel.
4. At one end of reel, insert a long strip of newspaper
between reel and bedknife (Figure 55). While slowly
rotating reel forward, turn bedbar adjusting screw
clockwise (on same end of reel) (Figure 54), one click
at a time, until paper is pinched lightly, when inserted
32
| Categories | Lawn Mower Manual, Toro Lawn Mower Manual |
|---|---|
| Tags | Toro 04030, Toro 04031, Toro 04202, Toro 04206, Toro Greensmaster |
| Model Number | 04030, 04206, 04031, 04202 |
| Model Year | 2008 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 280000001-280999999 |
| Product Name | Toro Greensmaster Flex 18 Mower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Product Type | Walk Behind Mower |
| Product Series | Toro Greensmaster - Flex Series |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)