Husqvarna ST724 Snow Blower Owners Manual

ASSEMBLY
TO INSTALL THE SHIFTER ROD
TO INSTALL REMOTE CHUTE
DEFLECTOR LEVER KNOB
Attach shift rod set aside earlier  to the shifter lever
with one (1) flatwasher and (1) cotter pin (See III.6).
●   Thread the knob onto the threaded end of the lever
until  it is  snug against  the  hex nut  and the  lip is
pointed  toward the  engine.   Tighten  the  hex  nut
against the bottom of the lever knob  (See III. 8-A).
Place  shift  lever into  sixth  gear  position.  Rotate
speed rod on rear of motor frame counterclockwise
down until it stops.
Align trunion nut on end of shift rod with the hole in
the speed rod. If trunion nut does not align with hole
in speed rod, twist trunion nut up or down on shift rod
until it does line up.
DRIFT CUTTER ASSEMBLY
(IF EQUIPPED)
Remove the fasteners securing the drift cutters and
then rotate drift cutters 180° (See  III. 8-B).
Put end of trunion nut through hole in speed rod and
attach washer and cotter pin (See  III.7).
Reinstall fasteners and secure.
Move  the shifter  lever  through  all  the speeds  to
ensure proper placement of the shifter  lever.
TO CHECK/ADJUST CLUTCH
CONTROL CABLES
The control cables attached to the auger clutch lever and
traction clutch lever may need to be adjusted before you
use your snow thrower.
Refer to "To Adjust the Clutch Control Cables" in the
"Service and Adjustment" section on  checking or ad-
justing the control cables.
TO INSTALL CHUTE ASSEMBLY TO
CHUTE FLANGE (III.8)
Remove    three   carriage     bolts,    flatwashers,
lockwashers and nuts from snow chute flange.
Position snow chute on snow chute flange and align
the three holes in the snow chute with tabs on snow
chute flange.
Replace the carriage bolts, from  inside of chute as
shown in III. 8, install flatwashers, lockwashers and
nuts.
Tighten nuts securely.
Hook remote chute  return spring supplied  in parts
bag through both spring bracket as on deflector and
chute extension.
18
Product Specification
CategoriesHusqvarna Snow Blower Manuals, Snow Blower Manuals
Tags
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 40 pages
Document TypeOwner's Manual
LanguageEnglish
Product BrandHusqvarna, Snow Blower
Document File TypePDF
Publisherhusqvarna.com
Wikipedia's PageHusqvarna
CopyrightAttribution Non-commercial
(1 votes, average: 5 out of 5)
Lawn and Garden readers have rated Husqvarna ST724 Snow Blower Owners Manual 5.0 out of 5.0 based on 1 product reviews.
Submit your review (optional)
(will not be displayed)
* Required Field

Husqvarna ST724 Snow Blower Owners Manual SKU UPC Model
Peter Reyes on Nov 05, 2017. Great blower

Blower has been a great blower everytime I needed it Performed well


Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website