English / USA
Tensioning the Saw Chain
Checking Chain Tension
Adjusting the Throttle
Cable*
A properly adjusted throttle cable is
the precondition for correct
operation in the full throttle, starting
throttle and idle positions.
1
Adjust the throttle cable only after
the unit is fully assembled.
Retensioning during cutting work:
:
:
:
Shut down the engine.
Wear work gloves to protect hands.
:
Shut off the engine and then
slacken the nut.
Chain must fit snugly against the
underside of the bar and it must still
be possible to pull the chain along
the bar by hand.
:
:
Hold the bar nose up.
Use screwdriver to turn the
tensioning screw (1) clockwise until
chain fits snugly against the
underside of the bar.
:
If necessary, retension the chain.
:
Use a suitable tool to push the slide
to the bottom of the slot (see
illustration).
A new chain has to be retensioned more
often than one that has been in use for
some time.
Check chain tension frequently –
see chapter "Operating Instructions /
During Operation".
Tighten down the nut firmly.
A new chain has to be retensioned more
often than one that has been in use for
some time – check chain tension
frequently – see chapter "Operating
Instructions / During Operation".
:
Check chain tension.
*
see "Guide to Using this Manual"
HT 100, HT 101, HT 130, HT 131
19
| Categories | Stihl Tiller Cultivator Manuals, Tiller Cultivator Manuals |
|---|---|
| Tags | STIHL HT 100, STIHL HT 101, STIHL HT 130, STIHL HT 131 |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Tiller Cultivator |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)