English / USA
:
:
:
Rotate the file at regular intervals
while filing to avoid one-sided wear.
Depth gauge setting
Lowering depth gauges
The depth gauge setting is reduced
when the chain is sharpened because
the top plate of the cutter slopes
downward towards the back.
Use a piece of hardwood to remove
burrs from cutting edge.
a
Check angles with the filing gauge.
All cutters must be the same length.
:
Check the depth gauge setting
every time you sharpen the chain.
If the cutters are not the same length,
they will have different heights. This
makes the chain run roughly and
increases the risk of breakage of the
chain.
The depth gauge determines the height
at which the cutter enters the wood and
thus the thickness of the chip removed.
:
Find the shortest cutter and then file
all other cutters back to the same
length – it is best to have this work
done in a workshop on an electric
grinder.
1
Specified distance or setting between
depth gauge and cutting edge = a:
This setting may be increased by 0.008"
(0.2
weather season – no frost.
mm) for cutting softwood in mild
:
Place a filing gauge (1) that
matches the chain pitch on the
chain – if the depth gauge projects
from the filing gauge, the depth
gauge has to be lowered.
Chain pitch
Inch
Depth gauge
setting “a“
(mm)
(9.32)
(9.32)
mm
(inch)
3/8
3/
8-PMN
-PMMC3
0.65
0.45
(0.026)
(0.018)
:
File down the depth gauge until it is
level with the filing gauge.
HT 100, HT 101, HT 130, HT 131
41
| Categories | Stihl Tiller Cultivator Manuals, Tiller Cultivator Manuals |
|---|---|
| Tags | STIHL HT 100, STIHL HT 101, STIHL HT 130, STIHL HT 131 |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Tiller Cultivator |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)