ASSEMBLY
Fitting the cutting head
• The chain is correctly
tensioned when there is no
slack on the underside of the
bar, but it can still be turned
easily by hand. Hold up the
bar tip and tighten the bar
nuts with the combination
wrench.
•
Fit the cutting head on
the shaft so that the screw
(A) is aligned with the
hole in the shaft as
shown.
B
•
•
Tighten screw A.
Tighten screw B.
•
When fitting a new chain, the
chain tension has to be
checked frequently until the
chain is run-in. Check the
chain tension regularly. A
correctly tensioned chain
gives good cutting
A
NOTE! Make sure that
the drive shaft inside the
shaft engages with the
cut-out in the cutting
head.
performance and long
lifetime.
Adjusting the harness
Mounting guide bar and chain
You should always use the
harness with the
machine to give
•
Unscrew the bar nut and
remove the guard.
maximum control and
reduce strain on your
arms and back.
•
Fit the bar over the bar
bolt.Place the bar in its
rearmost position. Place
the chain over the drive
sprocket and in the
1.
2.
Put on the harness.
groove on the bar. Begin
on the top side of the bar.
Hook the machine
onto the hook on the
harness.
•
•
Make sure that the edges
on the cutting links are
facing forward on the top
side of the bar.
3.
Adjust the length of the
harness so that the
hook is roughly level
with your right hip.
Fit the clutch cover and
locate the chain adjuster
pin in the hole on the bar.
Check that the drive links
of the chain fit correctly
on the drive sprocket and
that the chain is in the
groove on the bar.
Filling with oil
•
•
•
Open the cap on top of the
cutting head.
Fill with Husqvarna Chain
Oil.
Tighten the bar nut finger
tight.
Refit the cap.
•
Tension the chain by
using the combination
wrench. Turn the chain
adjuster screw clockwise.
The chain should be
tensioned until it fits
snugly on the underside
of the bar.
English –
17
| Categories | Chainsaw Manuals, Husqvarna Chainsaw Manuals |
|---|---|
| Tags | Husqvarna 326P4, Husqvarna X-Series |
| Model Year | 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Product Brand | Husqvarna, Chainsaw |
| Document File Type | |
| Publisher | husqvarna.com |
| Wikipedia's Page | Husqvarna |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)