MAINTENANCE
Air filter
NOTE: Use only HUSQVARNA replacement parts. Use of
other brands of replacement parts can cause damage to your
unit or injury to the operator or others. Your warranty does
not cover damage or liability caused by the use of accessories
and/or attachments not specifically recommended by
HUSQVARNA.
The air filter should be
cleaned regularly removing
dust and dirt to avoid:
•
•
•
•
carburetor malfunction
starting problems
reduced engine power
unnecessary wear to
engine parts
Maintenance schedule
Below you will find some general maintenance instructions.
Daily maintenance
•
abnormal fuel
•
•
•
•
•
•
•
Check throttle trigger and throttle trigger lockout function.
Check stop switch function.
Check that chain does not rotate at idling.
Clean the exterior of the machine.
Check that the harness is undamaged.
Check that nuts and screws are sufficiently tightened.
Check for fuel leaks.
consumption
Clean the filter after every
25
hours or more regularly
if operating conditions are
exceptionally dusty.
Cleaning the air filter
Dismantle the air filter cover and remove the air filter. Wash in
clean, warm soapy water. Ensure that the filter is dry before
refitting. An air filter used for a long period of time can never
be cleaned completely. Therefore it is necessary to replace the
filter from time to time with a new filter. A damaged air filter
must always be replaced.
Weekly maintenance
•
•
•
•
•
•
Check the starter, especially cord and return spring.
Clean the carburetor area.
Clean the exterior of the spark plug.
Remove it and check the electrode gap.
Adjust it to 0,5 mm (.020"), or change the spark plug.
Clean the cooling fins on the cylinder and check that the air
intake at the starter is not clogged.
If the machine is used in dusty conditions the air filter should
be soaked in oil, see the section on “Oilingthe air filter“.
Oiling the air filter
• Clean the air filter.
Always use HUSQVARNA
filter oil, order no. 503 47
• Clean or replace the muffler’s spark arrest screen (only
mufflers without a catalytic converter).
• File off any burrs on the sides of the bar.
7
3-01. The filter oil
contains a solvent to make
it spread evenly through
the filter. You should
Monthly maintenance
therefore avoid skin
• Clean the fuel tank.
contact. Put the filter in a
plastic bag and the pour
the filter oil over it. Knead
the plastic bag to distribute
the oil. Squeeze the excess
oil out of the filter inside
• Clean the exterior of the carburetor and the space around it.
• Clean the fan and the space around it.
• Check fuel hose for cracks or other damage. Change if
necessary.
• Change fuel filter in fuel tank.
• Check clutch, clutch spring and clutch drum for wear.
Change if necessary.
the plastic bag and pour
off the excess before fitting
the filter on the machine. Never use common engine oil. This
would drain through the filter quite quickly and collect in the
bottom.
• Check electrical wires and connections.
• Change the spark plug.
• Change the airfilter.
• Check and clean the muffler’s spark arrest screen if necessary
(only mufflers with a catalytic converter).
English –
23
| Categories | Chainsaw Manuals, Husqvarna Chainsaw Manuals |
|---|---|
| Tags | Husqvarna 325P4, Husqvarna X-Series |
| Model Year | 1995, 1996, 1997, 1998, 1999, 2000, 2001 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Product Brand | Husqvarna, Chainsaw |
| Document File Type | |
| Publisher | husqvarna.com |
| Wikipedia's Page | Husqvarna |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)