TECHNICAL DATA
355
Engine
Cylinder volume, cu.in/cm
Cylinder bore, inch/mm
Stroke, inch/mm
Idle speed, rpm
3
3,3/54,7
1,77/45
1,34/34
2 700
Power, kW/ rpm
2,6/ 9 000
Ignition system
Manufacture
FHP
Type of ignition system
Spark plug
Electrode gap, inch/mm
ET
Champion RCJ 7Y
0,02/0,5
Fuel and lubrication system
Manufacturer
Carburetor type
ZAMA
EL 15
Fuel capacity, US pint/litre
Oil pump capacity at 8500 rpm, ml/min
Oil capacity, US pint/litre
Type of oil pump
1,27/0,7
5-15
0,69/0,38
Automatic
Weight
Without bar and chain, Lbs/kg
12,1/5,5
Chain/bar
Standard bar length, inches/cm
Recommended bar lengths, inches/cm
Usable cutting length, inches/cm
15"/38
13-24"/33-61
12-23"/31-58
Chain speed at max. power, m/sec
Pitch, inch/mm
20,0
0,325"/8,25
3/8"/9,52
0,050"/1,3
0,058"/1,5
0,063"/1,6
Thickness of drive link, inch/mm
Number of teeth on drive sprocket
7
Recommended original and replacement bar
and chain combinations
Guide bar
Saw chain
Length
Pitch
inch
Max nose
radius
inch
Following is a list of recommended cutting equipment for the Husqvarna chain
saw model 355. The combinations of powerhead, bar and chain have been
investigated in accordance with the kickback and vibration requirements of
ANSI B 175.1 – 2000.
The guide bar nose radius is determined by either the maximum number of
teeth in the nose sprocket or the corresponding maximum nose radius of a
solid bar.
13
15
16
18
20
0,325"
0,325"
0,325"
0,325"
0,325"
10T
10T
10T
10T
10T
Husqvarna H30 or
Oregon 95VP
13
15
16
18
20
0,325"
0,325"
0,325"
0,325"
0,325"
10T
10T
10T
10T
12T
Husqvarna H25 or
Oregon 21BP
The following list is the chain saw manufacturers recommendations. There may
be other combinations available, which will also achieve kickback protection.
As we are listing the maximum guide bar nose radius, you may use a guide bar
with smaller nose radius than in our list. For guide bars of the same length, all
sprocket-nose guide bars of the same pitch and having the same number of of
sprocket teeth may be considered to have equivalent kickback energy. A hard
nose bar having the same length and nose radius as a sprocket-nose bar may
be considered to have equivalent or less kickback energy than the sprocket-
nose bar.
15
16
18
20
0,325"
0,325"
0,325"
0,325"
10T
10T
10T
12T
Oregon 34LG
15
16
18
20
24
3/8"
3/8"
3/8"
3/8"
3/8"
11T
11T
11T
11T
11T
Husqvarna H42 or
Oregon 73LP/73LG/73V
Low kickback saw chain is a chain which has only met the kickback
performance requirements of ANSI B 175.1 safety requirements for gasoline-
powered chain saws when tested on the representative sample of chain saws
below 3.8 cu. in. specified in ANSI B 175.1. We recommend that you as
replacement use the listed chains or "Low kickback saw chains" which are
available at your dealer.
Note: For the chains above you are free to choose between 0,050", 0,058" and
0,063" gauge drive link for the corresponding bar, see table below.
0,050"/1,3
0,058"/1,5
0,063"/1,6
mm H30/95VP
20BP
H25/21BP
22BP
33LG
34LG
35LG
72LP
72LG
73LG
75LG
72V
73V
75V
mm
mm
–
–
H42/73LP
75LP
´*3'=¶5|¨
34
– English
| Categories | Chainsaw Manuals, Husqvarna Chainsaw Manuals |
|---|---|
| Tags | Husqvarna 355 |
| Model Year | 1995, 1996, 1997, 1998, 1999, 2000, 2001 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Product Brand | Husqvarna, Chainsaw |
| Document File Type | |
| Publisher | husqvarna.com |
| Wikipedia's Page | Husqvarna |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)