MAINTENANCE
Spark plug
Maintenance schedule
The condition of the spark
plug is affected by:
Below follows some general maintenance instructions.
If you need further information please contact your service
workshop.
•
•
An incorrect carburettor
setting.
An incorrect fuel
mixture (too much or
faulty oil).
0,5
mm
Daily maintenance
1
1.
Clean the outside of the
machine.
•
A dirty air filter.
2.
Make sure the throttle
trigger lock and the
throttle function correctly
from a safety point of
view.
2
These factors cause
deposits on the spark plug
electrode that may result in
malfunction or starting
difficulties.
3.
4.
Check that the stop
switch functions.
3
If the machine is low on power, difficult to start or runs
poorly while idling always check the spark plug first.
Check that the cutting
head does not rotate while
idling.
If the spark plug is dirty, clean it and at the same time check
that the electrode gap is 0.5 mm. The spark plug should be
changed after about one month of operation or earlier if
necessary.
NOTE! Always use the recommended type of spark plug. An
incorrect spark plug can damage the cylinder/piston.
4
5.
6.
Clean the air filter.
Replace if necessary.
5
Check that the guard is
undamaged and not
cracked. Replace the
guards if they have been
exposed to impact or are
cracked.
Angle gear
The angle gear is filled with
a sufficient quantity of
grease at the factory.
6
However, before using the
machine you should check
that the angle gear is filled
to 3/4 with grease. Use
HUSQVARNA special
grease.
7.
Check that the trimmer
head is undamaged and
not cracked. Replace the
trimmer head if necessary.
7
8.
9.
Check that the locking
nut is tight.
Normally, the grease does
not need to be changed
except when repairs are
carried out.
Check that all nuts and
screws are tightened.
8
9
Two-part shaft
The end of the drive axle in
the lower shaft should be
lubricated with grease every
30
hours. There is a risk
that the drive axle ends
(splined coupling) on two-
part shafts jam if they are
not lubricated regularly.
English –
19
| Categories | Chainsaw Manuals, Husqvarna Chainsaw Manuals |
|---|---|
| Tags | Husqvarna 225L, Husqvarna 227L, Husqvarna 232L, Husqvarna 240L |
| Model Year | 1999, 2000, 2001 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Product Brand | Husqvarna, Chainsaw |
| Document File Type | |
| Publisher | husqvarna.com |
| Wikipedia's Page | Husqvarna |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)