S
Mix and pour fuel in an outdoor area on
bare ground; store fuel in a cool, dry, well
ventilated place; and use an approved,
marked container for all fuel purposes.
Wipe up all fuel spills before starting saw.
Move at least 10 feet (3meters) from fuel-
ing site before starting engine.
Turn the engine off and let your saw cool
in a non-combustible area, not on dry
leaves, straw, paper, etc. Slowly remove
fuel cap and refuel unit.
S
Use wedges made of plastic or wood.
Never of metal to hold the cut open.
S
S
Kickback Path
S
Store the unit and fuel in an area where
fuel vapors cannot reach sparks or open
flames from water heaters, electric mo-
tors or switches, furnaces, etc.
Avoid Obstructions
KICKBACK
WARNING:
Kickback can occur
when the moving chain contacts an object at
the upper portion of the tip of the guide bar or
when the wood closes in and pinches the
saw chain in the cut. Contact at the upper
portion of the tip of the guide bar can cause
the chain to dig into the object, which stops
the chain for an instant. The result is a light-
ning fast, reverse reaction which kicks the
guide bar up and back toward the operator. If
the saw chain is pinched along the top of the
guide bar, the guide bar can be driven rapidly
back toward the operator. Either of these
reactions can cause loss of saw control
which can result in serious injury. Guard
against kickback.
Clear The Working Area
REDUCE THE CHANCE OF
KICKBACK
Recognize that kickback can happen.
With a basic understanding of kickback,
you can reduce the element of surprise
which contributes to accidents.
S
S
S
Never let the moving chain contact any
object at the tip of the guide bar.
Keep the working area free from obstruc-
tions such as other trees, branches,
rocks, fences, stumps, etc. Eliminate or
avoid any obstruction that your sawchain
could hit while you are cutting through a
particular log or branch.
Rotational Kickback is the rapid upward
and backward motion of the chain saw that
can occur when the moving saw chain near
the upper portion of the tip of the guide bar
contacts an object such as a log or a branch.
S
Keep your saw chain sharp and properly
tensioned. A loose or dull chain can in-
crease the chance of kickback occurring.
Follow manufacturer’s chain sharpening
Pinch-Kickback and Pull-In occur when
the chain is suddenly stopped by being
pinched, caught, or by contacting a foreign
object in the wood. This sudden stopping of
the chain results in a reversal of the chain
force used to cut wood and causes the saw
to move in the opposite direction of the chain
and maintenance instructions.
Check
tension at regular intervals with the en-
gine stopped, never with the engine run-
ning. Make sure the bar clamp nuts are
securely tightened after tensioning the
chain.
rotation.
Pinch-Kickback drives the saw
straight back toward the operator.
Pull-In
S
Begin and continue cutting at full speed.
If the chain is moving at a slower speed,
there is greater chance of kickback oc-
curring.
pulls the saw away from the operator. Either
reaction can result in loss of control and
possibly serious injury.
Avoid Pinch--Kickback:
S
S
Cut one log at a time.
S
Be extremely aware of situations or ob-
structions that can cause material to
pinch the top of or otherwise stop the
chain.
Use extreme caution when re-entering a
previous cut.
S
S
Do not attempt cuts starting with the tip of
the bar (plunge cuts).
S
S
Do not cut more than one log at a time.
Do not twist the saw as the bar is with-
drawn from an undercut when bucking.
Watch for shifting logs orother forces that
could close a cut and pinch or fall into
chain.
Avoid Pull--In:
Use the Reduced--Kickback Guide Bar
and Low--Kickback Chain specified for
your saw.
S
S
Always begin cutting with the engine at
full speed and the saw housing against
wood.
3
| Categories | Chainsaw Manuals, Poulan Chainsaw Manuals |
|---|---|
| Tags | Poulan 2750, Poulan 2775, Poulan 2900, Poulan 3050 |
| Model Year | 2000 |
| Download File |
|
| Document Type | Owner's Manual |
| Language | English |
| Product Brand | Poulan. Poulan US phone support. Wheeled (Mowers, Tractors, Tillers): 1-800-849-1297 Handheld (Chainsaws, Trimmers): 1-800-554-6723 , Chainsaw |
| Document File Type | |
| Publisher | poulan.com |
| Wikipedia's Page | Poulan |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)