5.
Set the spark plug gap (Fig. 21) between the electrodes
to .032 in. (.81 mm).
Note: Replace the scraper whenever you replace the rotor
blades. This ensures proper snowthrower operation and
performance.
Note: The running time and the roughness of the driveway
or the sidewalk determines the wear rate of the rotor
blades.
.032 in.
(.81 mm)
Removing the Old Blade
m-3215
Note: You will need a No. T27 torx driver to complete
this procedure.
Figure 21
1.
Remove four torx screws and four locknuts that secure
the outer edges of the rotor blade to the rotor shaft
assembly (Fig. 23).
6.
Install the spark plug and torque it to 15 ft-lb
(20.4 Nm). If you do not have a torque wrench,
tighten the plug firmly.
2.
Remove two hex-head capscrews, spacers, and
locknuts that secure the center of the blade to the rotor
halves (Fig. 23).
7.
8.
Push the wire onto the spark plug.
Install the control panel with the capscrews.
3.
4.
Loosen the hex-head screw securing the rotor halves to
the auger shaft assembly (Fig. 23).
Replacing the Rotor Blades
Slide the blade out from between the rotor halves
(Fig. 23).
Before each season, inspect the rotor blades for wear.
When a rotor blade edge has worn to the wear indicator
hole (Fig. 22), replace both rotor blades to ensure proper
performance and to prevent damage to the underside of
the snowthrower.
1
Figure 22
1.
Wear indicator hole
15
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38440, Toro CCR 3650 |
| Model Number | 38440 |
| Model Year | 2000 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 200000001 - 200014063 |
| Product Name | Toro CCR 3650 Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | CCR 2000/3000/3600, Snowthrower |
| Swath | 20 inch |
| Discharge | Single Stage |
| Engine Manufacturer | Toro |
| Engine Oil Type | Toro 2 cycle / NMMA-TCW3 |
| Engine Motor Model # | R-tek |
| Engine Motor Size | 6.5 hp |
| Engine Motor Type | 2 Cycle EPA1 |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)