Husqvarna 345e 346XP 353 TrioBrake Chainsaw Owners Manual

ASSEMBLY
Fit the bar over the bar bolts. Place the bar in its rearmost
position. Place the chain over the drive sprocket locate it in
the groove on the bar. Begin on the top edge of the bar.
tension regularly. A correctly tensioned chain ensures good
cutting performance and long life.
Note: If clutch cover is difficult to remove, replace bar nuts,
engage brake and rerelease (an audible click will be heard if
released properly).
Make sure that the edges of the cutting links are facing
forward on the top edge of the bar.
Install the clutch cover and locate the chain tensioner pin in
the clutch cover. Check that the chain’s drive links fit
correctly over the drive sprocket and that the chain is
correctly located in the groove in the bar. Install the chain
tensioning pulley but do not tighten.
Tension the chain by turning the wheel down (+). The chain
should be tensioned until it does not sag from the underside
of the bar.
The chain is correctly tensioned when it does not sag from
the underside of the bar, but can still be turned easily by
hand. Hold up the bar tip and tighten the bar knob by turning
the knob clockwise.
When fitting a new chain, the chain tension has to be
checked frequently until the chain is run-in. Check the chain
18
– English
Product Specification
CategoriesChainsaw Manuals, Husqvarna Chainsaw Manuals
Tags, , ,
Model Year2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 44 pages
Document TypeOperator's Manual
LanguageEnglish
Product BrandHusqvarna, Chainsaw
Document File TypePDF
Publisherhusqvarna.com
Wikipedia's PageHusqvarna
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website