SYMBOL EXPLANATION
Symbols
Always wear approved protective gloves.
WARNING! Clearing saws, brushcutters
and trimmers can be dangerous!
Careless or incorrect use can result in
serious or fatal injury to the operator or
others.
Use anti-slip and stable boots.
Read through the Operator‘s Manual
carefully and understand the content
before using the machine.
Other symbols/decals on the machine refer to
special certification requirements for certain
markets.
Always use
•
A protective helmet where there is a
risk of falling objects
•
•
Ear protection
Approved eye protection
Checks and/or maintenance should be
carried out with the engine switched off,
with the stop switch in the STOP
position.
This product is in accordance with
applicable CE directives.
Saw attachment
with shaft
This machine is not electrically
insulated. If the machine touches or
comes close to high-voltage power lines
it could lead to death or serious injury.
Electricity can jump from one point to
another by arcing. The higher the
voltage, the greater the distance
Always wear approved protective gloves.
electricity can jump. Electricity can also
travel through branches and other
objects, especially if they are wet.
Always keep a safe distance of at least
Regular cleaning required.
10
m (30 ft) between the machine and
high-voltage power lines and/or any
objects that are touching them. If you
need to work closer than this always
contact the relevant power company to
make sure the power is switched off
before you start work.
Ocular control.
Saw attachment
without shaft
This machine is not electrically
insulated. If the machine touches or
comes close to high-voltage power lines
it could lead to death or serious injury.
Electricity can jump from one point to
another by arcing. The higher the
voltage, the greater the distance
Approved eye protection must always be
used.
electricity can jump. Electricity can also
travel through branches and other
objects, especially if they are wet.
Always keep a safe distance of at least
Chain oil and chain oil flow adjustment
10
m (30 ft) between the machine and
high-voltage power lines and/or any
objects that are touching them. If you
need to work closer than this always
contact the relevant power company to
make sure the power is switched off
before you start work.
2
– English
| Categories | Chainsaw Manuals, Husqvarna Chainsaw Manuals |
|---|---|
| Tags | Husqvarna S 36, Oregon 90 SG, Oregon 91 VG |
| Model Year | 2002, 2003 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Product Brand | Husqvarna, Chainsaw |
| Document File Type | |
| Publisher | husqvarna.com |
| Wikipedia's Page | Husqvarna |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)