SAFETY INSTRUCTIONS
Chain
•
Bar groove width (inches/mm).The groove in the bar must
match the width of the chain drive links.
A chain is made up of a number of links, which are available
in standard and low-kickback versions.
None
Standard
Low-kickback
Cutting link
Drive link
Side link
•
Chain oil hole and hole for chain tensioner. The bar must
be matched to the chain saw design.
Chain
•
Chain pitch (inches)
Combining these links in different ways gives different
degrees of kickback reduction. In terms of kickback reduction
alone, four different types of link are available.
Level of kick-
back reduction Cutting link Drive link
Side link
•
Drive link width (mm/inches)
Number of drive links.
Low
Standard
•
•
High
Extra high
Some terms that describe the bar and chain
Level of kickback reduction. The level of kickback
reduction offered by a chain is only indicated by its model
number. See the Technical data section to find the model
numbers of chains that are recommended for use with
your model of chain saw.
When the cutting equipment supplied with your saw becomes
worn or damaged you must replace it with one of the bars and
chains recommended by us. See the Technical data section.
Bar
•
Length (inches/cm)
•
Number of teeth on bar tip sprocket (T). Small number =
small tip radius = low risk of kickback.
Sharpening your chain and adjusting raker
clearance
WARNING! The risk of kickback is increased
with a badly sharpened chain!
!
•
•
Chain pitch (inches).The spacing between the drive links
of the chain must match the spacing of the teeth on the
bar tip sprocket and drive sprocket.
General information on sharpening cutting teeth
•
Never use a blunt chain.When the chain is blunt you have
to exert more pressure to force the bar through the wood
and the cuttings will be very small.If the chain is very blunt
it will not produce any cuttings at all.Wood powder would
be the only result.
Number of drive links. The number of drive links is
determined by the length of the bar, the chain pitch and
the number of teeth on the bar tip sprocket.
English – 11
| Categories | Chainsaw Manuals, Husqvarna Chainsaw Manuals |
|---|---|
| Tags | Husqvarna 365, Husqvarna 372XP |
| Model Year | 2002, 2003, 2004 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Product Brand | Husqvarna, Chainsaw |
| Document File Type | |
| Publisher | husqvarna.com |
| Wikipedia's Page | Husqvarna |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)