Husqvarna 365 372XP Chainsaw Owners Manual

MAINTENANCE
Needle bearing lubrication
Cooling system
The clutch drum is tted with one of the following drive
sprockets:
To keep the working temperature as low as possible the
machine is equipped with a cooling system.
A   Spur sprocket (the chain sprocket is welded on the
drum)
The cooling system consists of:
1
2
3
4
5
Air intake on the starter.
Air guide plate.
B   Rim sprocket (replaceable)
Fins on the ywheel.
Cooling ns on the cylinder.
Cylinder cover (directs cold air over the cylinder).
5
Both versions have a needle bearing on the drive shaft, which
has to be greased regularly (once a week).
4
3
CAUTION! Use only high quality bearing grease or engine oil.
Adjustment of the oil pump
2
1
The oil pump is adjustable. Adjustments are made by turning
the screw using a screwdriver or combination spanner. The
machine is supplied from the factory set to 1 turn open.
Turning the screw clockwise will reduce the oil ow and
turning the screw anti-clockwise will increase the oil ow.
Clean the cooling system with a brush once a week, more
often in demanding conditions. A dirty or blocked cooling
system results in the machine overheating which causes
damage to the piston and cylinder.
Air Injectioncentrifugal cleaning
Centrifugal cleaning means the following: All air to the
carburettor passes through the starter. Dirt and dust is
centrifuged out by the cooling fan.
WARNING! The engine must not be running
when making adjustments.
!
Recommended settings:
IMPORTANT! In order to maintain operation of the centrifugal
cleaning system it must be regularly maintained.
Bar -15":
1 turn from the closed position.
2 turns from the closed position.
3 turns from the closed position.
4 turns from the closed position.
Bar 15" -18":
Bar 18" -24":
Bar 24" -:
Clean the air intake to the starter, the ns on the ywheel,
the space around the ywheel, inlet pipe and carburettor
compartment.
These recommendations apply to Husqvarnas chain oil, for
other chain oils increase the oil ow by one step.
English 33
Product Specification
CategoriesChainsaw Manuals, Husqvarna Chainsaw Manuals
Tags,
Model Year2002, 2003, 2004
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 40 pages
Document TypeOperator's Manual
LanguageEnglish
Product BrandHusqvarna, Chainsaw
Document File TypePDF
Publisherhusqvarna.com
Wikipedia's PageHusqvarna
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website