Husqvarna 323P4 325P4 325P5 X-Series Chainsaw Owners Manual

ASSEMBLY
Fitting the cutting head
The chain is correctly
tensioned when there is no
slack on the underside of the
bar, but it can still be turned
easily by hand. Hold up the
bar tip and tighten the bar
nuts with the combination
wrench.
Fit the cutting head on the
shaft so that the screw (A)
is aligned with the hole in
the shaft as shown.
Tighten screw A.
Tighten screw B.
B
When fitting a new chain,
the chain tension has to be
checked frequently until the
chain is run-in. Check the
chain tension regularly. A
correctly tensioned chain
gives good cutting
NOTE! Make sure that the
drive shaft inside the shaft
engages with the cut-out in
the cutting head.
A
performance and long
lifetime.
Mounting guide bar and chain
Adjusting the harness
Unscrew the bar nut and
remove the guard.
You should always use the
harness with the machine to
give maximum control and
reduce strain on your arms
and back.
Fit the bar over the bar
bolt.Place the bar in its
rearmost position. Place
the chain over the drive
sprocket and in the groove
on the bar. Begin on the
top side of the bar.
1.
2.
Put on the harness.
Hook the machine onto
the hook on the harness.
A
Make sure that the edges
on the cutting links are
facing forward on the top
side of the bar.
3.
Adjust the length of the
harness so that the hook
is roughly level with your
right hip.
Fit the clutch cover and
locate the chain adjuster
pin in the hole on the bar.
Check that the drive links
of the chain fit correctly on
the drive sprocket and that
the chain is in the groove
on the bar. Tighten the bar
nut finger tight.
B
Filling with oil
Open the cap on top of
the cutting head.
Tension the chain by using
the combination wrench.
Turn the chain adjuster
screw clockwise. The chain
should be tensioned until it
fits snugly on the
Fill with Husqvarna
Chain Oil.
Refitthecap.
underside of the bar.
English
17
Product Specification
CategoriesChainsaw Manuals, Husqvarna Chainsaw Manuals
Tags, , ,
Model Year2002, 2003, 2004, 2005, 2006
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 28 pages
Document TypeOperator's Manual
LanguageEnglish
Product BrandHusqvarna, Chainsaw
Document File TypePDF
Publisherhusqvarna.com
Wikipedia's PageHusqvarna
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website