Husqvarna 357XP 359 Chainsaw Owners Manual

SAFETY INSTRUCTIONS
C   Checking chain lubrication
E
Needle bearing maintenance
Check the chain lubrication
each time you refuel.
A
B
The clutch drum is equipped
with one of the following
chain sprockets:
Aim the tip of the saw at a
light coloured surface about
20
cm away. After 1 minute
running at 3/4 throttle you
should see a distinct line of
oil on the light surface.
Spur sprocket (A) (the chain
sprocket is welded on the
drum)
Rim sprocket (B)
(exchangeable)
Both versions have built-in
needle bearing at the drive
shaft, whitch has to be
greased regularly (once a
week).
If the chain lubrication is not working:
NOTE! Use only high quality bearing grease or engine oil.
1
Check that the oil channel
in the bar is not
F
Checking wear on cutting equipment
Saw chain
obstructed. Clean if
necessary.
Check the saw chain daily for:
Visible cracks in rivets and
links.
2
3
Check that the groove in
the edge of the bar is
clean. Clean if necessary.
Whether the chain is stiff.
Whether rivets and links are
badly worn.
Check that the bar tip
sprocket turns freely and
that the lubricating hole in
the tip is not blocked.
Clean and lubricate if
necessary.
We recommend you
min 4 mm
(0,16")
compare the existing chain
with a new chain to decide
how badly it is worn.
When the length of the
cutting teeth has worn down
to only 4 mm the chain must
be replaced.
If the chain lubrication
system is still not working
after carrying out the
above measures you
should contact your
service agent.
G   Chain drive sprocket
The clutch drum is fitted with
one of the following drive
sprockets:
D   Lubricating the bar tip sprocket
A
B
A
B
SPUR (integral drive
sprocket)
Lubricate the bar tip
sprocket each time you
refuel. Use the special
grease gun and a good
quality bearing grease.
RING (replaceable)
Regularly check the
degree of wear on the
drive sprocket. Replace if
wear is excessive.
Replace the drive
sprocket whenever you
replace the chain.
English
15
Product Specification
CategoriesChainsaw Manuals, Husqvarna Chainsaw Manuals
Tags,
Model Year2002, 2003, 2004, 2005, 2006
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 36 pages
Document TypeOperator's Manual
LanguageEnglish
Product BrandHusqvarna, Chainsaw
Document File TypePDF
Publisherhusqvarna.com
Wikipedia's PageHusqvarna
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website