5.
Remove the six bolts and locknuts that hold the scraper
in place (Fig. 16).
5. Lift up the shroud and disconnect the wire from the
spark plug (Fig. 18).
2
1
2
m-5062
3
Figure 18
1
m-5060
1.
Shroud
2. Spark-plug wire
Figure 16
6.
Clean any debris from around the base of the spark
plug.
1.
2.
Carriage bolt (6)
Locknut (6)
3.
Scraper
7.
8.
Remove the spark plug.
Examine the spark plug and replace it if it is cracked,
fouled, dirty, or if the electrodes are worn.
6.
7.
Remove the old scraper.
Install a new scraper to the housing using the bolts and
the locknuts you previously removed.
Important
could enter the cylinder and damage the engine.
Do not clean the electrodes because grit
8.
Connect the wire to the spark plug.
Install the control panel.
9.
Set the gap between the electrodes on the spark plug at
0.030 in. (0.76 mm) as shown in Figure 19.
9.
10.
Insert the key in the switch.
1
Replacing the Spark Plug
m-3215
Use a NGK BPMR4A or equivalent spark plug. Install a
new spark plug before each season.
Figure 19
1.
0.030 in. (0.76 mm)
1.
2.
3.
Stop the engine and wait for all moving parts to stop.
Remove the key from the switch.
10.
Install the sparkplug by hand and then torque it to
Remove the two mounting screws that secure the
control panel to the housing (Fig. 17).
15
ft-lb (20.4 N m). If you do not have a torque wrench,
tighten the plug firmly.
2
11.
12.
13.
Connect the wire to the spark plug.
Install the control panel.
Insert the key in the switch.
Replacing the Drive Belt
m-5061
Inspect the drive belt before each season, and replace it if it
is worn or damaged.
1
Figure 17
1.
2.
3.
Stop the engine and wait for all moving parts to stop.
Remove the key from the switch.
1.
Control panel
2. Mounting screws (2)
Disconnect the wire from the spark plug. Refer to steps
4.
Lift off the panel, allowing it to hang on the recoil rope.
3
through 5 of Replacing the Spark Plug on page 15.
15
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38600, Toro 38602, Toro Snow Commander |
| Model Year | 2002 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 220000001 - 220999999 |
| Product Name | 38600, 38602 |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Single Stage, Single Stage Snow Commander, Snowthrower |
| Swath | 24 inch |
| Discharge | Single Stage |
| Engine Manufacturer | Toro |
| Engine Oil Type | Toro 2 cycle / NMMA-TCW3 |
| Engine Motor Size | 7 hp |
| Engine Motor Type | 2 Cycle EPA1 |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(1 votes, average: 5 out of 5)
Lawn and Garden readers have rated Toro Snow Commander 38600 38602 Snow Blower Operators Manual, 2002 5.0 out of 5.0 based on 1 product reviews. Great snow blower. Would certainly buy another.