Unfolding the Handle
Important
Ensure that the rotor control cable and the
traction drive cable are properly adjusted (Fig. 2). Refer to
Adjusting the Rotor Control Cable on page 12, and to
Adjusting the Traction Drive Cable on page 13.
1.
Cut the plastic tie that secures the rotor control cable
(Fig. 2) to the handle.
4
Installing the Discharge Chute
3
1.
Place the discharge chute over the chute ring, and align
the hole in the back of the discharge chute with the
center hole in the chute ring (Fig. 5).
5
2
1
m-5053
Figure 2
2
3
1.
2.
3.
Plastic tie
4.
5.
Traction drive cable
Handle
Rotor control cable
Control bar
Important
If you do not cut the plastic tie, the rotor
brake will not function properly.
2.
Loosen the knobs and pull out the handle locks until the
upper handle rotates freely (Fig. 3).
1
2
3
1
m-5049
5
4
Figure 5
m-5072
1.
2.
Chute ring
3. Chute handle
Figure 3
Discharge chute
1.
2.
3.
Knob (2)
4.
5.
Handle lock (2)
Cable guide
Upper handle (right side)
2.
3.
Insert a screw in the center hole of the chute ring from
the inside until the screw just passes through the hole in
the discharge chute (Fig. 5).
Traction drive cable
3.
Position the upper handle as shown in Figure 4.
Insert the chute handle over the discharge chute, align
the center hole in the chute handle with the screw, and
fully insert the screw through the center hole in the
chute handle (Fig. 5).
4.
5.
Install a washer and a locknut on the screw, and tighten
the locknut until it is finger tight.
Align the remaining holes of the chute handle, the
discharge chute, and the chute ring, and insert the two
remaining screws through the holes from the inside of
the chute ring.
m-5046
6.
7.
Install the washers and the locknuts on the screws, and
tighten the locknuts until they are finger tight.
Figure 4
Tighten all locknuts securely.
4.
5.
Fully insert the handle locks (Fig. 3).
Ensure that the cable guide is in position as shown in
Figure 3.
6.
Tighten the knobs until they are snug.
7
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38600, Toro 38602, Toro Snow Commander |
| Model Year | 2002 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 220000001 - 220999999 |
| Product Name | 38600, 38602 |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Single Stage, Single Stage Snow Commander, Snowthrower |
| Swath | 24 inch |
| Discharge | Single Stage |
| Engine Manufacturer | Toro |
| Engine Oil Type | Toro 2 cycle / NMMA-TCW3 |
| Engine Motor Size | 7 hp |
| Engine Motor Type | 2 Cycle EPA1 |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(1 votes, average: 5 out of 5)
Lawn and Garden readers have rated Toro Snow Commander 38600 38602 Snow Blower Operators Manual, 2002 5.0 out of 5.0 based on 1 product reviews. Great snow blower. Would certainly buy another.