2003-2008 Husqvarna 435 435e 440e Chainsaw Workshop Manual

Safety equipment
Operating test:
The engine must not be running during the test.
Guide bar length
38cm/15"
Height
50 cm/20"
Hold the chainsaw over a firm surface. The
height of the guide bar above the surface is
given in the table above.
Let go of the front handle and let the chainsaw
fall towards the surface.
Fig 10
When the guide bar hits the surface the chain
brake must engage (see figure 10).
6.3
Silencer – removal
WARNING!
Do not touch the silencer until it
has cooled down, otherwise you
may burn yourself.
1
Remove the cylinder cover, silencer, gasket and
cooling plate.
2
If the saw is fitted with a spark arrestor mesh (A) this
must also be removed. If necessary, use the com-
bination spanner to push down the plate edge and
remove the spark arrestor mesh (see figure 11).
Fig 11
Cleaning and inspection
Clean and inspect all parts carefully. If there are any
cracks or other defects replace the damaged parts
with new ones.
The spark arrestor mesh is best cleaned with a wire
brush. If the mesh is damaged it must be replaced.
If the mesh is blocked the saw will overheat and this
will cause damage to cylinder and piston.
Never use the saw with a silencer that is in poor
condition. Always use original parts.
6.4
Silencer – refitting
1
If the saw is equipped with a spark arrestor mesh
this should be fitted first. When fitting the mesh,
make sure that the mesh is inserted in the right
position. If necessary, use the combination spanner
to insert the mesh.
2
Refit
cooling plate
gasket
silencer, tighten bolts to a torque of 8–10 Nm.
cylinder cover
3
Run the saw for at least 1 minute, then retighten the
silencer bolts to 12–14 Nm.
English – 19
Product Specification
CategoriesChainsaw Manuals, Husqvarna Chainsaw Manuals
Tags, ,
Model Year2003, 2004, 2005, 2006, 2007, 2008
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 56 pages
Document TypeOperator's Manual
LanguageEnglish
Product BrandHusqvarna, Chainsaw
Document File TypePDF
Publisherhusqvarna.com
Wikipedia's PageHusqvarna
CopyrightAttribution Non-commercial
(3 votes, average: 5 out of 5)
Lawn and Garden readers have rated 2003-2008 Husqvarna 435 435e 440e Chainsaw Workshop Manual 5.0 out of 5.0 based on 3 product reviews.
Submit your review (optional)
(will not be displayed)
* Required Field

2003-2008 Husqvarna 435 435e 440e Chainsaw Workshop Manual SKU UPC Model
Chris on Mar 17, 2016. 2003-2008 Husqvarna 435 435e 440e Chainsaw Workshop Manual

Excellent, just what was needed


stevie on Feb 12, 2013.



greg on Feb 03, 2013.



Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website