TECHNICAL DATA
336
Engine
Recommended original and replacement
bar and chain combinations
Cylinder volume, cu.in/cm
Cylinder bore, inch/mm
Stroke, inch/mm
Idle speed, rpm
3
2,15/35,2
1,5/38
1,22/31
2 800
1,5/ 9 600
Following is a list of recommended cutting equipment for
the Husqvarna Model 336. The combinations of
powerhead, bar and chain have been investigated in
accordance with the kickback requirements of ANSI B
175.1 – 2000. The guide bar nose radius is determined by
either the maximum number of teeth in the nose sprocket or
the corresponding maximum nose radius of a solid bar.
Power, kW/ rpm
Ignition system
Manufacture
Type of ignition system
Spark plug
SEM
CD
NGK BPMR 7A
Champion RCJ 7Y
0,02/0,5
The following list is the chain saw manufacturers
recommendations. There may be other combinations
available, which will also achieve kickback protection.
Electrode gap, inch/mm
Fuel and lubrication system
Manufacturer
Carburetor type
Fuel capacity, US pint/litre
Oil pump capacity at 8 500 rpm, ml/min
Oil capacity, US pint/litre
Type of oil pump
As we are listing the maximum guide bar nose radius, you
may use a guide bar with smaller nose radius than in our
list. For guide bars of the same length, all sprocket-nose
guide bars of the same pitch and having the same number
of of sprocket teeth may be considered to have equivalent
kickback energy. A hard nose bar having the same length
and nose radius as a sprocket-nose bar may be considered
to have equivalent or less kickback energy than the
sprocket-nose bar.
Zama
C1Q EL20
0,76/0,36
3-7
0,43/0,2
Automatic
Weight
Without bar and chain, Lbs/kg
8,4/3,8
Low kickback saw chain is a chain which is has met the
kickback performance requirements of ANSI B 175.1 safety
requirements for gasoline-powered chain saws when tested
on the representative sample of chain saws below 3.8 cu.
in. specified in ANSI B 175.1. We recommend that you as
replacement use the listed chains or "Low kickback saw
chains" which are available at your dealer.
Chain/bar
Standard bar length, inches/cm
Recommended bar lengths, inches/cm
Usable cutting length, inches/cm
Chain speed at max. power, m/sec
13"/33
12-16"/30-41
11-15"/28-38
18,3
Pitch, inch
Thickness of drive link, inch/mm
Number of teeth on drive sprocket
0,325"/8,25
0,050"/1,3
7
Guide bar
Saw chain
Length
inch
Pitch
inch
Max nose
radius
12
14
16
3/8
3/8
3/8
9T
9T
9T
Husqvarna S36x or Oregon 91VS
Husqvarna H30 or Oregon 95VP
13
15
16
0,325
0,325
0,325
10T
10T
10T
L
1
5
Type
Inch
3/8"
Inch/mm
Inch/mm
Angle
Angle
Angle
Inch/mm
Inch/cm: dl
S36x
91VS
0,050"/1,3
5/32" /4,5
3/16" /4,8
60°
30°
0°
0,025"/0,65
12"/30:45 14"/34:52
16"/41:56
H30
95VP
0,325"
0,050"/1,3
60°
30°
10°
0,025"/0,65
13"/33:56 15"/38:64
16"/41:66
´®z+H*•¶5@¨
34
– English
| Categories | Chainsaw Manuals, Husqvarna Chainsaw Manuals |
|---|---|
| Tags | Husqvarna 336 |
| Model Year | 2003 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Product Brand | Husqvarna, Chainsaw |
| Document File Type | |
| Publisher | husqvarna.com |
| Wikipedia's Page | Husqvarna |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)