Poulan 1950 1975 2055 2050 2075 2150 2155 2175 2350 2375 2150PR LE Series Chainsaw Owners Manual

Cutters
Depth Gauge
Checking the tension:
Use the screwdriver end of the chain adjust-
menttool(bar  tool) tomovethe chainaround
the bar. If the chain does not rotate, it is too
tight.Iftooloose,   thechainwillsagbelowthe
bar.
Drive Links
Chain Adjustment
Tool (Bar Tool)
Chain Brake Nuts
Adjusting the tension:
Place chain onto the sprocket
Place chain over and behind clutch, fit-
ting the  drive links  in the  clutch drum
sprocket.
Chain  tension  is  very  important.
Chain
7.
8.
stretches during use. This is especially true
during the first few times you use your saw.
Always check chain tension each  time you
use and refuel your saw.
Fit  bottom of  drive links  between  the
teeth in the sprocket in the nose of the
guide bar.
You can adjust the chain tension by loosen-
ing the chain brake nuts and turning the ad-
justing screw 1/4 of a turn while lifting up on
the bar.
9.
10.
Fit chain drive links into bar groove.
Pullguidebar  forward untilchain is snug
in guide  bar groove.   Ensure all  drive
links are in the bar groove.
S  Ifchainistootight,turnadjustingscrew1/4
turn counterclockwise.
S  If chain is too loose, turn adjusting screw
NOTE:
CHAIN  BRAKE  MUST  BE
1/4
turn clockwise.
DISENGAGED BEFORE INSTALLA-
TIONONTHESAW.   TODISENGAGE
CHAIN BRAKE,  PULL THE  FRONT
HAND GUARD BACK TOWARD THE
REAR  OF THE  CHAIN BRAKE  AS
FARASPOSSIBLE  (SEEILLUSTRA-
TION).
Adjusting
Screw
DISENGAGED
Guide Bar
Chain Brake Nuts
Adjusting Screw -- 1/4 Turn
Front Hand Guard
S  Lift up the  tip of the  bar and tighten  the
chain brake nuts with the bar tool.
S  Recheck chain tension.
ENGAGED
Chain Brake
Nuts
Chain Brake
11.
12.
Now,installchainbrakemakingsurethe
adjusting pin is  positioned in the lower
holeintheguidebar.   Remember thispin
moves thebar forwardand backwardas
the screw is turned.
WARNING:
If the saw is operated
with a loose chain, the chain could jump off
the guide bar and result in serious injury.
Install chain brake nuts and finger tight-
en only.  Once  the chain is  tensioned,
youwillneedtotightenchainbrakenuts.
CHAIN TENSION
(Including units with chain already installed)
NOTE:
When  adjusting  chain  tension,
make sure the chain  brake nuts are finger
tight only.   Attempting to tension the  chain
when  the chain  brake  nuts are  tight  can
cause damage.
7
Product Specification
CategoriesChainsaw Manuals, Poulan Chainsaw Manuals
Tags, , , , , , , , , , ,
Model Year2003
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 18 pages
Document TypeOwner's Manual
LanguageEnglish
Product BrandPoulan. Poulan US phone support. Wheeled (Mowers, Tractors, Tillers): 1-800-849-1297 Handheld (Chainsaws, Trimmers): 1-800-554-6723 , Chainsaw
Document File TypePDF
Publisherpoulan.com
Wikipedia's PagePoulan
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website